If you want to inspect the quality of our 200-301 Questions Vce study dumps, you can download our free dumps from Omgzlook and go through them. The unique questions and answers will definitely impress you with the information packed in them and it will help you to take a decision in their favor. The high quality and high pass rate has bbecome a reason for thousand of candidates to choose. If you know 200-301 Questions Vce training materials through acquaintance introduction, then you must also know the advantages of 200-301 Questions Vce. We are both perfect on the quality and the price of the 200-301 Questions Vce study braindumps. We have helped millions of thousands of candidates to prepare for the 200-301 Questions Vce exam and all of them have got a fruitful outcome, we believe you will be the next winner as long as you join in us!
CCNA 200-301 Also it is good for releasing pressure.
We think of providing the best services of 200-301 - Cisco Certified Network Associate Exam Questions Vce exam questions as our obligation. These Cisco Latest 200-301 Exam Cram Sheet exam dumps are authentic and help you in achieving success. Do not lose hope and only focus on your goal if you are using Latest 200-301 Exam Cram Sheet dumps.
Good practice materials like our Cisco Certified Network Associate Exam study question can educate exam candidates with the most knowledge. Do not make your decisions now will be a pity for good. It is a popular belief that only processional experts can be the leading one to do some adept job.
Our Cisco 200-301 Questions Vce exam materials have plenty of advantages.
The software version of our 200-301 Questions Vce study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the 200-301 Questions Vce training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. Friends or workmates can also buy and learn with our 200-301 Questions Vce practice guide together.
Repeated attempts will sharpen your minds. Maybe our 200-301 Questions Vce learning quiz is suitable for you.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Over the years, VMware 6V0-32.24 exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. ASQ CQE - If you want to find a desirable job, you must rely on your ability to get the job. But if the clients buy our IBM C1000-177 training quiz they can immediately use our product and save their time. Huawei H13-821_V3.0-ENU - Please make a decision quickly. AAPC CPC - Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate.
Updated: May 28, 2022