That is the reason why we make it without many sales tactics to promote our 200-301 Pdf Vce learning materials, their brand is good enough to stand out in the market. Download our 200-301 Pdf Vce training prep as soon as possible and you can begin your review quickly. High as 98 to 100 percent of exam candidates pass the exam after refer to the help of our 200-301 Pdf Vce practice braindumps. You are bound to pass the exam if you buy our 200-301 Pdf Vce learning guide. Instant answer feedback allows you to identify your vulnerabilities in a timely manner, so as to make up for your weaknesses. The superiority of our 200-301 Pdf Vce practice materials is undeniable.
CCNA 200-301 It can help you to pass the exam successfully.
With 200-301 - Cisco Certified Network Associate Exam Pdf Vce study engine, you will get rid of the dilemma that you work hard but cannot improve. You can choose other products, but you have to know that Omgzlook can bring you infinite interests. Only Omgzlook can guarantee you 100% success.
In order to facilitate the user's offline reading, the 200-301 Pdf Vce study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. In this mode, users can know the 200-301 Pdf Vce prep guide inside the learning materials to download and print, easy to take notes on the paper, and weak link of their memory, at the same time, every user can be downloaded unlimited number of learning, greatly improve the efficiency of the users with our 200-301 Pdf Vce exam questions. Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns.
Cisco 200-301 Pdf Vce - When choosing a product, you will be entangled.
When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the 200-301 Pdf Vce study materials. While others are playing games online, you can do online 200-301 Pdf Vce exam questions. We are sure that as you hard as you are, you can pass 200-301 Pdf Vce exam easily in a very short time. While others are surprised at your achievement, you might have found a better job.
In recent years, the market has been plagued by the proliferation of learning products on qualifying examinations, so it is extremely difficult to find and select our 200-301 Pdf Vce test questions in many similar products. However, we believe that with the excellent quality and good reputation of our study materials, we will be able to let users select us in many products.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Besides, the simulate test environment will help you to be familiar with the Amazon ANS-C01 actual test. If you are really in doubt, you can use our trial version of our Salesforce Sales-Cloud-Consultant exam questions first. Databricks Databricks-Machine-Learning-Associate - Our business policy is "products win by quality, service win by satisfaction". ISM CORe - If you are now determined to go to research, there is still a little hesitation in product selection. VMware 2V0-31.24 - Stop hesitating.
Updated: May 28, 2022