Our experts generalize the knowledge of the exam into our 200-301 Passing Score exam materials showing in three versions. PDF version of 200-301 Passing Score study questions - support customers' printing request, and allow you to have a print and practice in papers. Software version of 200-301 Passing Score learning guide - supporting simulation test system. According to the data that are proved and tested by our loyal customers, the pass rate of our 200-301 Passing Score exam questions is high as 98% to 100%. If you are clueless about the oncoming exam, our 200-301 Passing Score guide materials are trustworthy materials for your information. It is all about efficiency and accuracy.
CCNA 200-301 Just make your own decisions.
CCNA 200-301 Passing Score - Cisco Certified Network Associate Exam And you can free donwload the demos to have a look. A good choice can make one work twice the result with half the effort, and our Latest 200-301 Examprep study materials will be your right choice. With the rapid development of society, people pay more and more attention to knowledge and skills.
It is not just an easy decision to choose our 200-301 Passing Score prep guide, because they may bring tremendous impact on your individuals development. Holding a professional certificate means you have paid more time and effort than your colleagues or messmates in your major, and have experienced more tests before succeed. Our 200-301 Passing Score real questions can offer major help this time.
Cisco 200-301 Passing Score - Never say you can not do it.
If we redouble our efforts, our dreams will change into reality. Although we might come across many difficulties during pursuing our dreams, we should never give up. If you still have dreams, our 200-301 Passing Score study materials will help you realize your dreams. Where is a will, there is a way. And our 200-301 Passing Score exam questions are the exact way which can help you pass the exam and get the certification with ease. Just have a try on our 200-301 Passing Score practice guide, then you will know you can succeed.
In addition, the exam qualification can prove that you have high skills. However, like all the exams, Cisco 200-301 Passing Score test is also very difficult.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
It has been widely recognized that the HP HPE7-A01 exam can better equip us with a newly gained personal skill, which is crucial to individual self-improvement in today’s computer era. PRINCE2 PRINCE2Foundation - What do you know about Omgzlook? Have you ever used Omgzlook exam dumps or heard Omgzlook dumps from the people around you? As professional exam material providers in IT certification exam, Omgzlook is certain the best website you've seen. IBM C1000-156 - Omgzlook has a huge IT industry elite team. ARDMS SPI - Cisco certification exam is one of the important exams. Cisco certification Microsoft DP-203-KR exam is an exam concerned by lots of IT professionals.
Updated: May 28, 2022