Then windows software of the 200-301 Latest Material exam questions, which needs to install on windows software. Aiso online engine of the 200-301 Latest Material study materials, which is convenient because it doesn’t need to install on computers. As we all know, the world does not have two identical leaves. Once you have questions about our 200-301 Latest Material latest exam guide, you can directly contact with them through email. We are 7*24*365 online service. The strength of our the IT elite team will make you feel incredible.
CCNA 200-301 The free demo has three versions.
CCNA 200-301 Latest Material - Cisco Certified Network Associate Exam If you do not give up, the next second is hope. Where is a will, there is a way. And our 200-301 Testking Learning Materials exam questions are the exact way which can help you pass the exam and get the certification with ease.
According to the survey, the candidates most want to take Cisco 200-301 Latest Material test in the current IT certification exams. Of course, the Cisco 200-301 Latest Material certification is a very important exam which has been certified. In addition, the exam qualification can prove that you have high skills.
Cisco 200-301 Latest Material - Yes, this is true.
We regard the customer as king so we put a high emphasis on the trust of every users, therefore our security system can protect you both in payment of 200-301 Latest Material guide braindumps and promise that your computer will not be infected during the process of payment on our 200-301 Latest Material study materials. Moreover, if you end up the cooperation between us,we have the responsibility to delete your personal information on 200-301 Latest Material exam prep. In a word, Wwe have data protection act for you to avoid information leakage!
In addition, Omgzlook exam dumps will be updated at any time. If exam outline and the content change, Omgzlook can provide you with the latest information.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
Our SAP C_IEE2E_2404 study guide provides free trial services, so that you can learn about some of our topics and how to open the software before purchasing. SAP C-SAC-2402 - This is because IT experts can master the question point well, so that all questions the candidates may come across in the actual test are included in Omgzlook exam dumps. CompTIA SY0-601-KR - They contain questions and answers on all the core points of your exam syllabus. And then are what materials your worthwhile option? Do you have chosen Omgzlook Cisco CompTIA N10-009 real questions and answers? If so, you don't need to worry about the problem that can't pass the exam. Huawei H13-821_V3.0-ENU - Besides, to fail while trying hard is no dishonor.
Updated: May 28, 2022