Our 200-301 Key Concepts exam quiz is so popular not only for the high quality, but also for the high efficiency services provided which owns to the efforts of all our staffs. First of all, if you are not sure about the 200-301 Key Concepts exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy 200-301 Key Concepts study guide or not. Omgzlook's providing learning materials can not only help you 100% pass the exam, but also provide you a free one-year update service. Cisco 200-301 Key Concepts is one of the important certification exams. During the clients use our products they can contact our online customer service staff to consult the problems about our products.
CCNA 200-301 The rate of return will be very obvious for you.
CCNA 200-301 Key Concepts - Cisco Certified Network Associate Exam Then you no longer need to worry about being fired by your boss. In fact, our 200-301 Valid Test Questions Pdf exam questions have helped tens of thousands of our customers successfully achieve their certification. The moment you choose to go with our 200-301 Valid Test Questions Pdf study materials, your dream will be more clearly presented to you.
Omgzlook Cisco 200-301 Key Concepts exam training materials is the most effective way to pass the certification exam. With this certification, you will achieve your dreams, and become successful. The curtain of life stage may be opened at any time, the key is that you are willing to show, or choose to avoid.
Cisco 200-301 Key Concepts - You can really try it we will never let you down!
As a IT worker sometime you may know you will take advantage of new technology more quickly by farming out computer operations, we prefer to strengthen own strong points. Our 200-301 Key Concepts test braindump materials is popular based on that too. As we all know the passing rate for IT exams is low, the wise choice for candidates will select valid 200-301 Key Concepts test braindump materials to make you pass exam surely and fast. Professional handles professional affairs.
Then you can start learning our 200-301 Key Concepts exam questions in preparation for the exam. After years of hard work, our 200-301 Key Concepts guide training can take the leading position in the market.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
The intelligence of the SAP C_THR81_2405 test engine has inspired the enthusiastic for the study. AAPC CPC - Only firm people will reach the other side. No need to doubt and worry, thousands of candidates choose our exam training materials, you shouldn't miss this high pass-rate EMC D-NWR-DY-01 training PDF materials. Our effort in building the content of our Network Appliance NS0-404 learning questions lead to the development of learning guide and strengthen their perfection. All SAP C_C4H320_34 test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation.
Updated: May 28, 2022