You deserve this opportunity to win and try to make some difference in your life if you want to attend the 200-301 Free Dumps exam and get the certification by the help of our 200-301 Free Dumps practice braindumps. As we all know, all companies will pay more attention on the staffs who have more certifications which is a symbol of better understanding and efficiency on the job. Our 200-301 Free Dumps study materials have the high pass rate as 98% to 100%, hope you can use it fully and pass the exam smoothly. The simple and easy-to-understand language of 200-301 Free Dumps guide torrent frees any learner from studying difficulties. In particular, our experts keep the 200-301 Free Dumps real test the latest version, they check updates every day and send them to your e-mail in time, making sure that you know the latest news. So many exam candidates feel privileged to have our 200-301 Free Dumps practice braindumps.
CCNA 200-301 Also it is good for releasing pressure.
We think of providing the best services of 200-301 - Cisco Certified Network Associate Exam Free Dumps exam questions as our obligation. These 200-301 Reliable Exam Camp Pdf exam questions dumps are of high quality and are designed for the convenience of the candidates. These are based on the 200-301 Reliable Exam Camp Pdf Exam content that covers the entire syllabus.
Good practice materials like our Cisco Certified Network Associate Exam study question can educate exam candidates with the most knowledge. Do not make your decisions now will be a pity for good. It is a popular belief that only processional experts can be the leading one to do some adept job.
Our Cisco 200-301 Free Dumps exam materials have plenty of advantages.
The software version of our 200-301 Free Dumps study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the 200-301 Free Dumps training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. Friends or workmates can also buy and learn with our 200-301 Free Dumps practice guide together.
Repeated attempts will sharpen your minds. Maybe our 200-301 Free Dumps learning quiz is suitable for you.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Over the years, Cisco 700-750 exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. Salesforce Mobile-Solutions-Architecture-Designer - If you want to find a desirable job, you must rely on your ability to get the job. But if the clients buy our SAP C_C4H620_34 training quiz they can immediately use our product and save their time. BCS CTFL4 - Please make a decision quickly. Cisco CCST-Networking - Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate.
Updated: May 28, 2022