We believe that you will like our 200-301 Exam Labs exam prep. Maybe most of people prefer to use the computer when they are study, but we have to admit that many people want to learn buy the paper, because they think that studying on the computer too much does harm to their eyes. 200-301 Exam Labs test questions have the function of supporting printing in order to meet the need of customers. Without ambiguous points of questions make you confused, our 200-301 Exam Labs practice materials can convey the essence of the content suitable for your exam. With our 200-301 Exam Labs exam guide, you will achieve what you are expecting with ease. You can take the 200-301 Exam Labs training materials and pass it without any difficulty.
CCNA 200-301 They are professionals in every particular field.
Under the situation of intensifying competition in all walks of life, will you choose to remain the same and never change or choose to obtain a 200-301 - Cisco Certified Network Associate Exam Exam Labs certification which can increase your competitiveness? I think most of people will choose the latter, because most of the time certificate is a kind of threshold, with 200-301 - Cisco Certified Network Associate Exam Exam Labs certification, you may have the opportunity to enter the door of an industry. Our 200-301 Test Engine exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our 200-301 Test Engine training engine are reasonable for even students to afford and according to the version that you want to buy.
A good 200-301 Exam Labs certification must be supported by a good 200-301 Exam Labs exam practice, which will greatly improve your learning ability and effectiveness. Our study materials have the advantage of short time, high speed and high pass rate. You only take 20 to 30 hours to practice our 200-301 Exam Labs guide materials and then you can take the exam.
Come to study our Cisco 200-301 Exam Labs learning materials.
If you buy the Software or the APP online version of our 200-301 Exam Labs study materials, you will find that the timer can aid you control the time. Once it is time to submit your exercises, the system of the 200-301 Exam Labs preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our 200-301 Exam Labs training guide, come to choose and purchase.
Once they need to prepare an exam, our 200-301 Exam Labs study materials are their first choice. As you know, it is troublesome to get the 200-301 Exam Labscertificate.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
We sincerely hope that you can pay more attention to our SAP C_SIGDA_2403 study questions. If you buy the SAP C_SAC_2415 study materials from our company, you just need to spend less than 30 hours on preparing for your exam, and then you can start to take the exam. Tens of thousands of our loyal customers are benefited from our ACAMS CAMS-KR study materials and lead a better life now after they achieve their ACAMS CAMS-KR certification. Microsoft AI-102 - Everything that appears in our products has been inspected by experts. You just need to pay the relevant money for the Amazon DOP-C02-KR practice materials.
Updated: May 28, 2022