If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing Cisco certification 200-301 Exam Duration exam, and at the same time do not know how to choose a more effective shortcut to pass Cisco certification 200-301 Exam Duration exam. Now Omgzlook provide you a effective method to pass Cisco certification 200-301 Exam Duration exam. It will play a multiplier effect to help you pass the exam. For tomorrow's success, is right to choose Omgzlook. Selecting Omgzlook, you will be an IT talent. Now you can free download part of practice questions and answers of Cisco certification 200-301 Exam Duration exam on Omgzlook.
CCNA 200-301 I wish you good luck.
With our exclusive online Cisco 200-301 - Cisco Certified Network Associate Exam Exam Duration exam training materials, you'll easily through Cisco 200-301 - Cisco Certified Network Associate Exam Exam Duration exam. Cisco 200-301 Reliable Exam Sims is a very important certification exam in the IT industry and passing Cisco certification 200-301 Reliable Exam Sims exam is very difficult. But in order to let the job position to improve spending some money to choose a good training institution to help you pass the exam is worthful.
It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value. There are many dumps and training materials providers that would guarantee you pass the Cisco 200-301 Exam Duration exam.
Cisco 200-301 Exam Duration - So, the competition is in fierce in IT industry.
The empty promise is not enough. So our Omgzlook provides to all customers with the most comprehensive service of the highest quality including the free trial of 200-301 Exam Duration software before you buy, and the one-year free update after purchase. We will be with you in every stage of your 200-301 Exam Duration exam preparation to give you the most reliable help. Even if you still failed the 200-301 Exam Duration certification exam, we will full refund to reduce your economic loss as much as possible.
Instead of wasting your time on preparing for 200-301 Exam Duration exam, you should use the time to do significant thing. Therefore, hurry to visit Omgzlook to know more details.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
If you are tired with the screen for study, you can print the Huawei H12-711_V4.0 pdf dumps into papers. Microsoft PL-400-KR - Moreover, the colleagues and the friends with IT certificate have been growing. HP HPE7-A02 - Besides, we will offer you the benefits of 365 days free update. If you have any questions about purchasing SAP C-DBADM-2404 exam software, you can contact with our online support who will give you 24h online service. The reason that we get good reputation among dump vendors is the most reliable Fortinet ICS-SCADA pdf vce and the best-quality service.
Updated: May 28, 2022