Even if you know little about computers, you can easily begin to do exercises of the 200-301 Exam Dumps real exam dumps. Also, we have invited for many volunteers to try our study materials. The results show our products are suitable for them. If you encounter some problems when using our 200-301 Exam Dumps study materials, you can also get them at any time. After you choose 200-301 Exam Dumps preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results. You need to ensure that you have written down the correct email address.
CCNA 200-301 So Omgzlook a website worthy of your trust.
CCNA 200-301 Exam Dumps - Cisco Certified Network Associate Exam The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. Do not spend too much time and money, as long as you have Omgzlook learning materials you will easily pass the exam. In order to help you more Omgzlook the Cisco Reliable Test 200-301 Registration exam eliminate tension of the candidates on the Internet.
Pdf version- it is legible to read and remember, and support customers’ printing request, so you can have a print and practice in papers. Software version-It support simulation test system, and times of setup has no restriction. Remember this version support Windows system users only.
Cisco 200-301 Exam Dumps - We guarantee you 100% to pass the exam.
We all well know the status of Cisco certification 200-301 Exam Dumps exams in the IT area is a pivotal position, but the key question is to be able to get Cisco 200-301 Exam Dumps certification is not very simple. We know very clearly about the lack of high-quality and high accuracy exam materials online. Exam practice questions and answers Omgzlook provide for all people to participate in the IT industry certification exam supply all the necessary information. Besides, it can all the time provide what you want. Buying all our information can guarantee you to pass your first Cisco certification 200-301 Exam Dumps exam.
Omgzlook's Cisco 200-301 Exam Dumps exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Omgzlook can not only provide all the information related to the Cisco certification Microsoft MB-220 exam for the candidates, but also provide a good learning opportunity for them. Adobe AD0-E716 - This is indeed true, no doubt, do not consider, act now. ACAMS CAMS - With Omgzlook's help, you do not need to spend a lot of money to participate in related cram or spend a lot of time and effort to review the relevant knowledge, but can easily pass the exam. ISTQB CT-TAE test is one of the most important exams and the certificate will bring you benefits. Our training program can effectively help you have a good preparation for Cisco certification Salesforce Data-Cloud-Consultant exam.
Updated: May 28, 2022