Besides, the price of our 200-301 Exam Blueprint learning guide is very favourable even the students can afford it. By resorting to our 200-301 Exam Blueprint exam materials, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our 200-301 Exam Blueprint practice braindumps, and the passing rate is 98-100 percent. With it, you will be pass the Cisco 200-301 Exam Blueprint exam certification which is considered difficult by a lot of people. With this certification, you can light up your heart light in your life. And we are grimly determined and confident in helping you.
CCNA 200-301 Then join our preparation kit.
The combination of 200-301 - Cisco Certified Network Associate Exam Exam Blueprint Exam practice software and PDF Questions and Answers make the preparation easier and increase the chances to get higher score in the 200-301 - Cisco Certified Network Associate Exam Exam Blueprint exam. What most useful is that PDF format of our Latest 200-301 Test Notes exam materials can be printed easily, you can learn it everywhere and every time you like. It is really convenient for candidates who are busy to prepare the exam.
Our 200-301 Exam Blueprint exam material is good to 200-301 Exam Blueprint pass exam in a week. Now you can become 200-301 Exam Blueprintcertified professional with Dumps preparation material. Our 200-301 Exam Blueprint exam dumps are efficient, which our dedicated team keeps up-to-date.
Cisco 200-301 Exam Blueprint - Also, they have respect advantages.
With many advantages such as immediate download, simulation before the real exam as well as high degree of privacy, our 200-301 Exam Blueprint actual exam survives all the ordeals throughout its development and remains one of the best choices for those in preparation for 200-301 Exam Blueprint exam. Many people have gained good grades after using our 200-301 Exam Blueprint real dumps, so you will also enjoy the good results. Don’t hesitate any more. Time and tide wait for no man. Come and buy our 200-301 Exam Blueprint exam questions!
However, how to pass Cisco certification 200-301 Exam Blueprint exam quickly and simply? Our Omgzlook can always help you solve this problem quickly. In Omgzlook we provide the 200-301 Exam Blueprint certification exam training tools to help you pass the exam successfully.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
Our Salesforce Marketing-Cloud-Account-Engagement-Specialist practice materials are suitable to exam candidates of different levels. Tableau TCC-C01 - Through so many feedbacks of these products, our Omgzlook products prove to be trusted. Since we have the same ultimate goals, which is successfully pass the Salesforce Energy-and-Utilities-Cloud exam. Microsoft SC-900 - If you fail to pass the exam, Omgzlook will full refund to you. Oracle 1z0-071 - Besides, you can take notes on it whenever you think of something important.
Updated: May 28, 2022