Our test-orientated high-quality 200-301 Dumps Materials exam questions would be the best choice for you, we sincerely hope all of our candidates can pass 200-301 Dumps Materials exam, and enjoy the tremendous benefits of our 200-301 Dumps Materials prep guide. Helping candidates to pass the 200-301 Dumps Materials exam has always been a virtue in our company’s culture, and you can connect with us through email at the process of purchasing and using, we would reply you as fast as we can. In order to ensure the quality of our 200-301 Dumps Materials preparation materials, we specially invited experienced team of experts to write them. The content of our 200-301 Dumps Materials practice engine comes from a careful analysis and summary of previous exam syllabus, so that you can accurately grasp the core test sites. Once you have a try, you can feel that the natural and seamless user interfaces of our 200-301 Dumps Materials study materials have grown to be more fluent and we have revised and updated 200-301 Dumps Materials learning braindumps according to the latest development situation.
CCNA 200-301 Please give us a chance to prove.
If you aren’t satisfied with our 200-301 - Cisco Certified Network Associate Exam Dumps Materials exam torrent you can return back the product and refund you in full. At present, our Pdf 200-301 Dumps study materials have applied for many patents. We attach great importance on the protection of our intellectual property.
In your every stage of review, our 200-301 Dumps Materials practice prep will make you satisfied. Our 200-301 Dumps Materials exam questions just focus on what is important and help you achieve your goal. With high-quality 200-301 Dumps Materials guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you.
Cisco 200-301 Dumps Materials - Need any help, please contact with us again!
In order to pass Cisco certification 200-301 Dumps Materials exam disposably, you must have a good preparation and a complete knowledge structure. Omgzlook can provide you the resources to meet your need.
Our questions and answers are based on the real exam and conform to the popular trend in the industry. You only need 20-30 hours to learn Cisco Certified Network Associate Exam exam torrent and prepare the exam.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
WELL WELL-AP - In today's competitive IT profession, if you want to stabilize your own position, you will have to prove your professional knowledge and technology level. To some extent, these Cisco 300-710 certificates may determine your future. Databricks Databricks-Certified-Data-Engineer-Professional - Now IT certification exam is one of the methods to inspect the employees' ability, but it is not so easy to is one of the way to IT certification exams. There are so many success examples by choosing our CIW 1D0-623 guide quiz, so we believe you can be one of them. Because of its popularity, you can use the Omgzlook Cisco Microsoft MB-800 exam questions and answers to pass the exam.
Updated: May 28, 2022