They provide comprehensive explanation and integral details of the answers and questions. Each question and answer are researched and verified by the industry experts. Our team updates the 200-301 Dumps Free certification material periodically and the updates include all the questions in the past thesis and the latest knowledge points. And on your way to success, they can offer titanic help to make your review more relaxing and effective. Moreover, the passing certificate and all benefits coming along are not surreal dreams anymore. You will find that learning is becoming interesting and easy.
CCNA 200-301 So their perfection is unquestionable.
Selecting our study materials is your rightful assistant with internationally recognized 200-301 - Cisco Certified Network Associate Exam Dumps Free certification. The results show our products are suitable for them. In addition, the system of our New 200-301 Test Syllabus test training is powerful.
The content system of 200-301 Dumps Free exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our 200-301 Dumps Free study materials, you can also get them at any time.
Cisco 200-301 Dumps Free - We are keeping advancing with you.
You can free download part of practice questions and answers about Cisco certification 200-301 Dumps Free exam to test our quality. Omgzlook can help you 100% pass Cisco certification 200-301 Dumps Free exam, and if you carelessly fail to pass Cisco certification 200-301 Dumps Free exam, we will guarantee a full refund for you.
It is well known that even the best people fail sometimes, not to mention the ordinary people. In face of the 200-301 Dumps Free exam, everyone stands on the same starting line, and those who are not excellent enough must do more.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Omgzlook is a website which can help you quickly pass Cisco certification SAP C-THR88-2405 exams. There is no doubt that if you pass the CompTIA FC0-U71 exam certification test, which means that your ability and professional knowledge are acknowledged by the authority field, we suggest that you can try our CompTIA FC0-U71 reliable exam dumps. Omgzlook is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification IBM C1000-137 exam related knowledge. We send learning information in the form of questions and answers, and our EMC D-CSF-SC-23 study materials are highly relevant to what you need to pass EMC D-CSF-SC-23 certification exam. Feedbacks of many IT professionals who have passed Cisco certification Fortinet NSE6_WCS-7.0 exam prove that their successes benefit from Omgzlook's help.
Updated: May 28, 2022