200-301 Collection Free test is one of the most important exams and the certificate will bring you benefits. Are you racking your brains for a method how to pass Cisco 200-301 Collection Free exam? Cisco 200-301 Collection Free certification test is one of the valuable certification in modern IT certification. Within the last few decades, IT got a lot of publicity and it has been a necessary and desirable part of modern life. Our training program can effectively help you have a good preparation for Cisco certification 200-301 Collection Free exam. Omgzlook's training program will be your best choice. Omgzlook is your best choice on the market today and is recognized by all candidates for a long time.
CCNA 200-301 We guarantee that you can pass the exam easily.
CCNA 200-301 Collection Free - Cisco Certified Network Associate Exam If not, your usage of our dump this time will make you treat our Omgzlook as the necessary choice to prepare for other IT certification exams later. Omgzlook is a website that provide accurate exam materials for people who want to participate in the IT certification. Omgzlook can help a lot of IT professionals to enhance their career blueprint.
The secret that Omgzlook helps many candidates pass 200-301 Collection Free exam is Cisco exam questions attentively studied by our professional IT team for years, and the detailed answer analysis. We constantly updated the 200-301 Collection Free exam materials at the same time with the exam update. We try our best to ensure 100% pass rate for you.
Cisco 200-301 Collection Free - PDF version is easy for read and print out.
Omgzlook is a reliable site offering the 200-301 Collection Free valid study material supported by 100% pass rate and full money back guarantee. Besides, our 200-301 Collection Free training material is with the high quality and can simulate the actual test environment, which make you feel in the real test situation. You can get the latest information about the 200-301 Collection Free real test, because our Omgzlook will give you one year free update. You can be confident to face any difficulties in the 200-301 Collection Free actual test no matter any changes.
Once you have well prepared with our 200-301 Collection Free dumps collection, you will go through the formal test without any difficulty. To help people pass exam easily, we bring you the latest 200-301 Collection Free exam prep for the actual test which enable you get high passing score easily in test.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Our website aimed to help you to get through your certification test easier with the help of our valid CompTIA FC0-U61 vce braindumps. When you choose Avaya 71801X valid study pdf, you will get a chance to participate in the simulated exam before you take your actual test. We hope all candidates can purchase Amazon CLF-C02 latest exam braindumps via PayPal. You can get prepared with our Cisco 100-490 exam materials only for 20 to 30 hours before you go to attend your exam. In addition, Omgzlook offer you the best valid ASQ CQE training pdf, which can ensure you 100% pass.
Updated: May 28, 2022