To satisfy the goals of exam candidates, we created the high quality and high accuracy 200-301 Collection File real materials for you. By experts who diligently work to improve our practice materials over ten years, all content are precise and useful and we make necessary alternations at intervals. We emphasize on customers satisfaction, which benefits both exam candidates and our company equally. For it also supports the offline practice. And the best advantage of the software version is that it can simulate the real exam. We are sure you can seep great deal of knowledge from our 200-301 Collection File study prep in preference to other materials obviously.
We can help you pass the Cisco 200-301 Collection File exam smoothly.
And we can always give you the most professional services on our 200-301 - Cisco Certified Network Associate Exam Collection File training guide. So that you will have the confidence to win the exam. Omgzlook's Cisco Valid Study Guide 200-301 Book exam training materials are highly targeted.
As we all know, a lot of efforts need to be made to develop a 200-301 Collection File learning prep. Firstly, a huge amount of first hand materials are essential, which influences the quality of the compilation about the 200-301 Collection File actual test guide. We have tried our best to find all reference books.
Cisco 200-301 Collection File - Add Omgzlook's products to cart now!
we can give you 100% pass rate guarantee. 200-301 Collection File practice quiz is equipped with a simulated examination system with timing function, allowing you to examine your 200-301 Collection File learning results at any time, keep checking for defects, and improve your strength. Besides, during the period of using 200-301 Collection File learning guide, we also provide you with 24 hours of free online services, which help to solve any problem for you at any time and sometimes mean a lot to our customers.
We promise that we will do our best to help you pass the Cisco certification 200-301 Collection File exam. Omgzlook's providing training material is very close to the content of the formal examination.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
SAP P_SAPEA_2023 - By clearing different Cisco exams, you can easily land your dream job. SAP C-BW4H-2404 - We will provide one year free update service for those customers who choose Omgzlook's products. Our ISQI CT-AI_v1.0_World exam questions zre up to date, and we provide user-friendly ISQI CT-AI_v1.0_World practice test software for the ISQI CT-AI_v1.0_World exam. Salesforce Education-Cloud-Consultant - As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance. They provide you a swift understanding of the key points of Cisco 300-445 covered under the syllabus contents.
Updated: May 28, 2022