Maybe you still have doubts about our 200-301 Actual Questions exam braindumps. We have statistics to prove the truth that the pass rate of our 200-301 Actual Questions practice engine is 98% to 100%. You final purpose is to get the 200-301 Actual Questions certificate. For a long time, high quality is our 200-301 Actual Questions exam questions constantly attract students to participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, and at the same time the 200-301 Actual Questions practice quiz brings more outstanding teaching effect. Our high-quality 200-301 Actual Questions} learning guide help the students know how to choose suitable for their own learning method, our 200-301 Actual Questions study materials are a very good option. More importantly, it is evident to all that the 200-301 Actual Questions training materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market.
CCNA 200-301 Please give us a chance to prove.
CCNA 200-301 Actual Questions - Cisco Certified Network Associate Exam We will solve your problem as quickly as we can and provide the best service. No company in the field can surpass us. So we still hold the strong strength in the market.
With high-quality 200-301 Actual Questions guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. In your every stage of review, our 200-301 Actual Questions practice prep will make you satisfied.
Cisco 200-301 Actual Questions - Need any help, please contact with us again!
In order to pass Cisco certification 200-301 Actual Questions exam disposably, you must have a good preparation and a complete knowledge structure. Omgzlook can provide you the resources to meet your need.
Many people, especially the in-service staff, are busy in their jobs, learning, family lives and other important things and have little time and energy to learn and prepare the exam. But if you buy our 200-301 Actual Questions test torrent, you can invest your main energy on your most important thing and spare 1-2 hours each day to learn and prepare the exam.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
EMC D-VXR-DY-01 - In today's competitive IT profession, if you want to stabilize your own position, you will have to prove your professional knowledge and technology level. APMG-International AgilePM-Foundation - For a better understanding of their features, please follow our website and try on them. AAPC CPC - There a galaxy of talents in the 21st century, but professional IT talents not so many. Besides, we are punctually meeting commitments to offer help on Huawei H13-611_V5.0 study materials. Because of its popularity, you can use the Omgzlook Cisco Huawei H13-611_V5.0 exam questions and answers to pass the exam.
Updated: May 28, 2022