Besides, the pollster conducted surveys of public opinions of our 1Z1-821 Mock Test study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our 1Z1-821 Mock Test actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career. You can totally rely on us! 1Z1-821 Mock Test study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if 1Z1-821 Mock Test learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our 1Z1-821 Mock Test exam questions. The download and install set no limits for the amount of the computers and the persons who use 1Z1-821 Mock Test test prep.
Oracle Solaris 1Z1-821 However, you must believe that this is true!
And we will give you 100% success guaranteed on the 1Z1-821 - Oracle Solaris 11 System Administration Mock Test training guide. In short, you will find the convenience and practicality of our 1Z1-821 Reliable Exam Review quiz guide in the process of learning. We will also continue to innovate and improve functions to provide you with better services.
We are convinced that our 1Z1-821 Mock Test exam questions can help you gain the desired social status and thus embrace success. The competition in today's society is the competition of talents. Can you survive and be invincible in a highly competitive society? Can you gain a foothold in such a complex society? If your answer is "no", that is because your ability is not strong enough.
Our Oracle 1Z1-821 Mock Test exam questions are your best choice.
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our 1Z1-821 Mock Test real study dumps. Our 1Z1-821 Mock Test exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the 1Z1-821 Mock Test certification successfully. With about ten years’ research and development we still keep updating our 1Z1-821 Mock Test prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
Our 1Z1-821 Mock Test learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our 1Z1-821 Mock Test exam engine. And our professional 1Z1-821 Mock Test study materials determine the high pass rate.
1Z1-821 PDF DEMO:
QUESTION NO: 1
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 2
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 3
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 4
Which command should you choose to display the current parameters for the FSS scheduler?
A. dispadmin - c FSS
B. prionctl -c FSS
C. dispadmin -c FSS -g
D. priocntl -c FSS -g
Answer: C
Explanation:
The dispadmin command displays or changes process scheduler parameters while the system is running.
-c class
Specifies the class whose parameters are to be displayed or changed. Valid class values are:
RT for the real-time class, TS for the time-sharing class, IA for the inter-active class, FSS for the fair- share class, and FX for the fixed-priority class. The time-sharing and inter- active classes share the same scheduler, so changes to the scheduling parameters of one will change those of the other.
-g
Gets the parameters for the specified class and writes them to the standard output.
QUESTION NO: 5
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
Being subjected to harsh tests of market, our Scrum PSPO-II exam questions are highly the manifestation of responsibility carrying out the tenets of customer oriented. According to the research statistics, we can confidently tell that 99% candidates have passed the IBM C1000-065 exam. If you are unfamiliar with our APM APM-PFQ practice materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our APM APM-PFQ training prep quickly. But our Pegasystems PEGACPBA88V1 exam questions have made it. If the user finds anything unclear in the Microsoft DP-300 exam questions exam, we will send email to fix it, and our team will answer all of your questions related to the Microsoft DP-300 actual exam.
Updated: May 28, 2022