Easily being got across by exam whichever level you are, our 1Z1-821 Exam Cost simulating questions have won worldwide praise and acceptance as a result. They are 100 percent guaranteed practice materials. Though at first a lot of our new customers didn't believe our 1Z1-821 Exam Cost exam questions, but they have became the supporters now. Our customer service staff will be delighted to answer your questions on the 1Z1-821 Exam Cost learing engine. And we will give you the most professional suggeston on the 1Z1-821 Exam Cost practice prep with kind and considerate manner in 24/7 online. And with the simpilied content of our 1Z1-821 Exam Cost practice questions, you can have a wonderful study experience as well.
All the help provided by 1Z1-821 Exam Cost test prep is free.
Oracle Solaris 1Z1-821 Exam Cost - Oracle Solaris 11 System Administration You will get the newest information about your exam in the shortest time. Knowledge is wealth. Modern society needs solid foundation, broad knowledge, and comprehensive quality of compound talents.
Our PDF version of 1Z1-821 Exam Cost training materials is legible to read and remember, and support printing request. Software version of 1Z1-821 Exam Cost practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only.
Oracle 1Z1-821 Exam Cost - In other words, we will be your best helper.
With our 1Z1-821 Exam Cost study materials, only should you take about 20 - 30 hours to preparation can you attend the exam. The rest of the time you can do anything you want to do to, which can fully reduce your review pressure. Saving time and improving efficiency is the consistent purpose of our 1Z1-821 Exam Cost learning materials. With the help of our 1Z1-821 Exam Cost exam questions, your review process will no longer be full of pressure and anxiety.
When you send us a message, we will reply immediately and we will never waste your precious time on studying our 1Z1-821 Exam Cost practice quiz. We will provide you with professional advice before you buy our 1Z1-821 Exam Cost guide materials.
1Z1-821 PDF DEMO:
QUESTION NO: 1
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 2
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 3
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 4
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
QUESTION NO: 5
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
Are you trying to pass the Network Appliance NS0-700 exam to get the longing Network Appliance NS0-700 certification? As we know, there are a lot of the advantages of the certification, such as higher salaries, better job positions and so on. If you find that you need to pay extra money for the Huawei H12-621_V1.0 study materials, please check whether you choose extra products or there is intellectual property tax. Microsoft PL-400-KR - But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely. Now, we have launched some popular SAP C-THR81-2405 training prep to meet your demands. All applicants who are working on the Scrum SAFe-SASM exam are expected to achieve their goals, but there are many ways to prepare for exam.
Updated: May 28, 2022