As you know, many exam and tests depend on the skills as well as knowledge, our 1Z1-821 Exam Answers study materials are perfectly and exclusively devised for the exam and can satisfy your demands both. There are free demos of our 1Z1-821 Exam Answers exam questions for your reference with brief catalogue and outlines in them. You can free download the demos of our 1Z1-821 Exam Answers learning prep on the website to check the content and displays easily by just clicking on them. With Omgzlook, you no longer need to worry about the Oracle 1Z1-821 Exam Answers exam. Omgzlook exam questions have good quality and good service. Do not be bemused about the exam.
Oracle Solaris 1Z1-821 Please pay more attention to our website.
Considering many exam candidates are in a state of anguished mood to prepare for the 1Z1-821 - Oracle Solaris 11 System Administration Exam Answers exam, our company made three versions of 1Z1-821 - Oracle Solaris 11 System Administration Exam Answers real exam materials to offer help. This is the achievement made by IT experts in Omgzlook after a long period of time. They used their knowledge and experience as well as the ever-changing IT industry to produce the material.
If you feel exam is a headache, don't worry. 1Z1-821 Exam Answers test answers can help you change this. 1Z1-821 Exam Answers study material is in the form of questions and answers like the real exam that help you to master knowledge in the process of practicing and help you to get rid of those drowsy descriptions in the textbook.
Oracle 1Z1-821 Exam Answers - It is up to you to make a decision.
It is our responsibility to relieve your pressure from preparation of 1Z1-821 Exam Answers exam. To help you pass the 1Z1-821 Exam Answers exam is our goal. The close to 100% passing rate of our dumps allow you to be rest assured in our products. Not all vendors dare to promise that if you fail the exam, we will give you a full refund. But our IT elite of Omgzlook and our customers who are satisfied with our 1Z1-821 Exam Answers exam software give us the confidence to make such promise.
You can free download the part of Oracle 1Z1-821 Exam Answers exam questions and answers Omgzlook provide as an attempt to determine the reliability of our products. I believe you will be very satisfied of our products.
1Z1-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 3
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 4
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 5
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
Microsoft AZ-800 - Our products are just suitable for you. Netskope NSK101 - The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. You will get your GitHub GitHub-Foundations certification with little time and energy by the help of out dumps. EMC D-PSC-MN-23 - If you buy the Omgzlook's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. As we all know, it is not an easy thing to gain the Microsoft SC-100 certification.
Updated: May 28, 2022