simulation tests of our 1Z1-821 Dumps Questions learning materials have the functions of timing and mocking exams, which will allow you to adapt to the exam environment in advance and it will be of great benefit for subsequent exams. After you complete the learning task, the system of our 1Z1-821 Dumps Questions test prep will generate statistical reports based on your performance so that you can identify your weaknesses and conduct targeted training and develop your own learning plan. For the complex part of our 1Z1-821 Dumps Questions exam question, you may be too cumbersome, but our system has explained and analyzed this according to the actual situation to eliminate your doubts and make you learn better. And the Software version of our 1Z1-821 Dumps Questions study materials have the advantage of simulating the real exam, so that the candidates have more experience of the practicing the real exam questions. The candidates can benefit themselves by using our 1Z1-821 Dumps Questions test engine and get a lot of test questions like exercises and answers. Our 1Z1-821 Dumps Questions actual questions are updated in a high speed.
Oracle Solaris 1Z1-821 The reality is often cruel.
Oracle Solaris 1Z1-821 Dumps Questions - Oracle Solaris 11 System Administration Hence one can see that the Oracle Solaris 11 System Administration learn tool compiled by our company are definitely the best choice for you. Imagine, if you're using a Latest 1Z1-821 Exam Test practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the Latest 1Z1-821 Exam Test test material can avoid these risks very well.
All in all, high efficiency of 1Z1-821 Dumps Questions exam material is the reason for your selection. We understand our candidates have no time to waste, everyone wants an efficient learning. So we take this factor into consideration, develop the most efficient way for you to prepare for the 1Z1-821 Dumps Questions exam, that is the real questions and answers practice mode, firstly, it simulates the real Oracle Solaris 11 System Administration test environment perfectly, which offers greatly help to our customers.
Oracle 1Z1-821 Dumps Questions - So Omgzlook a website worthy of your trust.
It is known to us that our 1Z1-821 Dumps Questions study materials have been keeping a high pass rate all the time. There is no doubt that it must be due to the high quality of our study materials. It is a matter of common sense that pass rate is the most important standard to testify the 1Z1-821 Dumps Questions study materials. The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. So if you buy the 1Z1-821 Dumps Questions study materials from our company, you will get the certification in a shorter time.
1Z1-821 Dumps Questions study materials including the official Oracle 1Z1-821 Dumps Questions certification training courses, Oracle 1Z1-821 Dumps Questions self-paced training guide, 1Z1-821 Dumps Questions exam Omgzlook and practice, 1Z1-821 Dumps Questions online exam 1Z1-821 Dumps Questions study guide. 1Z1-821 Dumps Questions simulation training package designed by Omgzlook can help you effortlessly pass the exam.
1Z1-821 PDF DEMO:
QUESTION NO: 1
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
QUESTION NO: 2
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 3
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 4
You are asked to troubleshoot networking issues on an unfamiliar system.
Select the correct command to display what network devices are installed.
A. ifconfig -a
B. dladm show-dev
C. dladm show-phys
D. dladm show-ether
E. netadm show-dev
F. netadm show-ether
Answer: C
QUESTION NO: 5
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
Microsoft MS-721 - Remember this version support Windows system users only. Cisco 300-445 - With it, you will be brimming with confidence, fully to do the exam preparation. We have three packages of the Microsoft DP-203-KR study materials: the PDF, Software and APP online and each one of them has its respect and different advantages. Oracle OMSB OMSB_OEN exam is a Technical Specialist exam. Buying all our information can guarantee you to pass your first Oracle certification SAP C-THR96-2405 exam.
Updated: May 28, 2022