So our Omgzlook will provide a exam simulation for you to experience the real exam model before real exam. 1Z0-821 Lab Questions exam simulation software is full of questions, which will improve your ability to face the exam after you exercise them. Besides, the detailed answers analysis provided by our professionals will make you be more confidence to pass 1Z0-821 Lab Questions exam. And with the aid of 1Z0-821 Lab Questions certification test, you can improve your skills and master some useful techniques in your job so that you can finish your work better and demonstrate your great ability before other people. Only in this way can you get more development opportunities. Also you can ask us any questions about 1Z0-821 Lab Questions exam any time as you like.
Oracle Solaris 1Z0-821 PDF version is easy for read and print out.
Omgzlook is a reliable site offering the 1Z0-821 - Oracle Solaris 11 System Administration Lab Questions valid study material supported by 100% pass rate and full money back guarantee. Once you have well prepared with our 1Z0-821 Practice Exam dumps collection, you will go through the formal test without any difficulty. To help people pass exam easily, we bring you the latest 1Z0-821 Practice Exam exam prep for the actual test which enable you get high passing score easily in test.
Our website aimed to help you to get through your certification test easier with the help of our valid 1Z0-821 Lab Questions vce braindumps. You just need to remember the answers when you practice 1Z0-821 Lab Questions real questions because all materials are tested by our experts and professionals. Our 1Z0-821 Lab Questions study guide will be your first choice of exam materials as you just need to spend one or days to grasp the knowledge points of 1Z0-821 Lab Questions practice exam.
Oracle 1Z0-821 Lab Questions - You will not need to struggle with the exam.
Regarding the process of globalization, every fighter who seeks a better life needs to keep pace with its tendency to meet challenges. 1Z0-821 Lab Questions certification is a stepping stone for you to stand out from the crowd. Nowadays, having knowledge of the 1Z0-821 Lab Questions study braindumps become widespread, if you grasp solid technological knowledge, you are sure to get a well-paid job and be promoted in a short time. According to our survey, those who have passed the exam with our 1Z0-821 Lab Questions test guide convincingly demonstrate their abilities of high quality, raise their professional profile, expand their network and impress prospective employers.
Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase.
1Z0-821 PDF DEMO:
QUESTION NO: 1
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
QUESTION NO: 2
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 3
You are asked to troubleshoot networking issues on an unfamiliar system.
Select the correct command to display what network devices are installed.
A. ifconfig -a
B. dladm show-dev
C. dladm show-phys
D. dladm show-ether
E. netadm show-dev
F. netadm show-ether
Answer: C
QUESTION NO: 4
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 5
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
SAP C-LIXEA-2404 - More detailed information is under below. And at the same time, you don't have to pay much time on the preparation for our SAP C-S4FCF-2023 learning guide is high-efficient. You can see that there are only benefits for you to buy our WGU Principles-of-Management learning guide, so why not just have a try right now? We are willing to recommend you to try the CompTIA FC0-U71 learning guide from our company. And we can assure you that you will get the latest version of our Juniper JN0-460 training materials for free from our company in the whole year after payment on Juniper JN0-460 practice quiz.
Updated: May 28, 2022