Even the 1Z0-821 Exam Questions test syllabus is changing every year; our experts still have the ability to master the tendency of the important knowledge as they have been doing research in this career for years. Through our prior investigation and researching, our 1Z0-821 Exam Questions preparation exam can predicate the exam accurately. You will come across almost all similar questions in the real 1Z0-821 Exam Questions exam. Our 1Z0-821 Exam Questions study materials provide a promising help for your 1Z0-821 Exam Questions exam preparation whether newbie or experienced exam candidates are eager to have them. And they all made huge advancement after using them. So do not hesitate and hurry to buy our study materials.
Oracle Solaris 1Z0-821 Do not worry.
You do not need to spend money; because our 1Z0-821 - Oracle Solaris 11 System Administration Exam Questions test questions provide you with the demo for free. There are a lot of IT experts in our company, and they are responsible to update the contents every day. If you decide to buy our Free Download 1Z0-821 study question, we can promise that we will send you the latest information every day.
The most notable feature of our 1Z0-821 Exam Questions learning quiz is that they provide you with the most practical solutions to help you learn the exam points of effortlessly and easily, then mastering the core information of the certification course outline. Their quality of our 1Z0-821 Exam Questions study guide is much higher than the quality of any other materials, and questions and answers of 1Z0-821 Exam Questions training materials contain information from the best available sources.
Oracle 1Z0-821 Exam Questions - You can learn anytime, anywhere.
In modern society, we are busy every day. So the individual time is limited. The fact is that if you are determined to learn, nothing can stop you! You are lucky enough to come across our 1Z0-821 Exam Questions exam materials. Our 1Z0-821 Exam Questions study guide can help you improve in the shortest time. Even you do not know anything about the 1Z0-821 Exam Questions exam. It absolutely has no problem. You just need to accept about twenty to thirty hours’ guidance of our 1Z0-821 Exam Questions learning prep, it is easy for you to take part in the exam.
Today's era is a time of fierce competition. Our 1Z0-821 Exam Questions exam question can make you stand out in the competition.
1Z0-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 3
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 4
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 5
Which command should you choose to display the current parameters for the FSS scheduler?
A. dispadmin - c FSS
B. prionctl -c FSS
C. dispadmin -c FSS -g
D. priocntl -c FSS -g
Answer: C
Explanation:
The dispadmin command displays or changes process scheduler parameters while the system is running.
-c class
Specifies the class whose parameters are to be displayed or changed. Valid class values are:
RT for the real-time class, TS for the time-sharing class, IA for the inter-active class, FSS for the fair- share class, and FX for the fixed-priority class. The time-sharing and inter- active classes share the same scheduler, so changes to the scheduling parameters of one will change those of the other.
-g
Gets the parameters for the specified class and writes them to the standard output.
EMC D-GAI-F-01 - Don't you think it is quite amazing? Just come and have a try! Fortinet FCSS_NST_SE-7.4 - You can think about whether these advantages are what you need! And if you don't know which one to buy, you can free download the demos of the BCS CTFL4 study materials to check it out. Cisco 100-490 - We have made all efforts to update our product in order to help you deal with any change, making you confidently take part in the exam. In order to provide a convenient study method for all people, our company has designed the online engine of the Microsoft DP-420 study practice dump.
Updated: May 28, 2022