When you want to correct the answer after you finish learning, the correct answer for our 070-762 Questions Fee test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the 070-762 Questions Fee exam torrent, and you can flexibly and freely choose these two modes according to your habit. In short, you will find the convenience and practicality of our 070-762 Questions Fee quiz guide in the process of learning. Once you choose our learning materials, your dream that you have always been eager to get Microsoft certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. Everybody knows that in every area, timing counts importantly.
MCP 070-762 So you can have wide choices.
MCP 070-762 Questions Fee - Developing SQL Databases With high quality training materials by Omgzlook provided, you will certainly pass the exam. We believe that our study materials will have the ability to help all people pass their Reliable Test 070-762 Cram Materials exam and get the related exam in the near future. Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the Reliable Test 070-762 Cram Materials exam with our study materials in the shortest time.
Omgzlook's Microsoft 070-762 Questions Fee exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance.
Now, quickly download Microsoft 070-762 Questions Fee free demo for try.
Being anxious for the 070-762 Questions Fee exam ahead of you? Have a look of our 070-762 Questions Fee training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 070-762 Questions Fee learning questions, and it is their job to officiate the routines of offering help for you. All points are predominantly related with the exam ahead of you. You will find the exam is a piece of cake with the help of our 070-762 Questions Fee study materials.
If the 070-762 Questions Fee exam is coming and the time is tense, it is better to choose our 070-762 Questions Fee test engine dumps. 070-762 Questions Fee test engine can simulate the actual test during the preparation and record the wrong questions for our reviewing.
070-762 PDF DEMO:
QUESTION NO: 1
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in the series.
You have a database named Sales that contains the following database tables. Customer, Order, and
Products.
The Products table and the order table shown in the following diagram.
The Customer table includes a column that stores the date for the last order that the customer placed.
You plan to create a table named Leads. The Leads table is expected to contain approximately 20,000 records.
Storage requirements for the Leads table must be minimized.
You need to begin to modify the table design to adhere to third normal form.
Which column should you remove for each table? To answer? drag the appropriate column names to the correct locations. Each column name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
In the Products table the SupplierName is dependent on the SupplierID, not on the ProductID.
In the Orders table the ProductName is dependent on the ProductID, not on the OrderID.
Note:
A table is in third normal form when the following conditions are met:
* It is in second normal form.
* All non-primary fields are dependent on the primary key.
Second normal form states that it should meet all the rules for First 1Normnal Form and there must be no partial dependencies of any of the columns on the primary key.
First normal form (1NF) sets the very basic rules for an organized database:
* Define the data items required, because they become the columns in a table. Place related data items in a table.
* Ensure that there are no repeating groups of data.
* Ensure that there is a primary key.
References: https://www.tutorialspoint.com/sql/third-normal-form.htm
QUESTION NO: 2
You manage a database with tables named Invoice and InvoiceDetails. Each invoice may have multiple records.
Users update the InvoiceDetails table by using a .NET web application. The application retrieves records from both tables and updates the tables by running an inline update statement.
Users experience slow performance when updating records in the application. The solution must meet the following requirements:
* Must use a stored procedure.
* Must not use inline update statements
* Must use a table-valued parameter.
* Must call the stored procedure to update all records.
You need to optimize performance.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Create a user-defined table type...
Table-valued parameters are declared by using user-defined table types. You can use table-valued parameters to send multiple rows of data to a Transact-SQL statement or a routine, such as a stored procedure or function, without creating a temporary table or many parameters.
Box 2: ..read-only input parameter.
Table-valued parameters must be passed as input READONLY parameters to Transact-SQL routines.
Box 3:
Example
The following example uses Transact-SQL and shows you how to create a table-valued parameter type, declare a variable to reference it, fill the parameter list, and then pass the values to a stored procedure.
USE AdventureWorks2012;
/* Create a table type. */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO
/* Create a procedure to receive data for the table-valued parameter. */ CREATE PROCEDURE dbo.
usp_InsertProductionLocation
@TVP LocationTableType READONLY
Etc.
/* Declare a variable that references the type. */
DECLARE @LocationTVP AS LocationTableType;
/* Add data to the table variable. */
INSERT INTO @LocationTVP (LocationName, CostRate)
SELECT Name, 0.00
FROM AdventureWorks2012.Person.StateProvince;
/* Pass the table variable data to a stored procedure. */
EXEC usp_InsertProductionLocation @LocationTVP;
GO
References:
https://docs.microsoft.com/en-us/sql/relational-databases/tables/use-table-valued-parameters- database-engine?vie
QUESTION NO: 3
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION NO: 4
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.
QUESTION NO: 5
You are reviewing the execution plans in the query plan cache. You observe the following:
- There are a large number of single use plans.
- There are a large number of simple execution plans that use multiple CPU cores.
You need to configure the server to optimize query plan execution.
Which two setting should you modify on the properties page for the Microsoft SQL Server instance?
To answer, select the appropriate settings in the answer area.
Answer:
Explanation
* Optimize for ad hoc workloads
The optimize for ad hoc workloads option is used to improve the efficiency of the plan cache for workloads that contain many single use ad hoc batches. When this option is set to 1, the Database
Engine stores a small compiled plan stub in the plan cache when a batch is compiled for the first time, instead of the full compiled plan. This helps to relieve memory pressure by not allowing the plan cache to become filled with compiled plans that are not reused.
* Cost Threshold for Parallelism
Use the cost threshold for parallelism option to specify the threshold at which Microsoft SQL Server creates and runs parallel plans for queries. SQL Server creates and runs a parallel plan for a query only when the estimated cost to run a serial plan for the same query is higher than the value set in cost threshold for parallelism. The cost refers to an estimated elapsed time in seconds required to run the serial plan on a specific hardware configuration.
5 means 5 seconds, but is is 5 seconds on a machine internal to Microsoft from some time in the
1990s.
There's no way to relate it to execution time on your current machine, so we treat it as a pure number now.
Raising it to 50 is a common suggestion nowadays, so that more of your simpler queries run on a single thread.
And so many of our loyal customers have achieved their dreams with the help of our Salesforce CRM-Analytics-and-Einstein-Discovery-Consultant exam questions. Immediately after you have made a purchase for our HP HPE2-T37 practice dumps, you can download our HP HPE2-T37 study materials to make preparations. If you have bought the AACE International CCP exam questions before, then you will know that we have free demos for you to download before your purchase. In order to give back to the society, our company will prepare a number of coupons on our SAP C-C4H62-2408 learning dumps. By concluding quintessential points into HP HPE7-A05 actual exam, you can pass the exam with the least time while huge progress.
Updated: May 28, 2022