We are committed to your success. Omgzlook's Microsoft 070-741 Practical Information exam training materials is the best training materials. If you are an IT staff, it will be your indispensable training materials. Based on the credibility in this industry, our 070-741 Practical Information study braindumps have occupied a relatively larger market share and stable sources of customers. Such a startling figure --99% pass rate is not common in this field, but we have made it with our endless efforts. And don't worry about how to pass the test, Omgzlook certification training will be with you.
MCSA: Windows Server 2016 070-741 The talent is everywhere in modern society.
Actually, some practice materials are shooting the breeze about their effectiveness, but our 070-741 - Networking with Windows Server 2016 Practical Information training quiz are real high quality practice materials with passing rate up to 98 to 100 percent. Opportunities always for those who are well prepared and we wish you not to miss the good opportunities. Omgzlook provide you with the most authoritative and the fullest Microsoft New 070-741 Test Pass4Sure exam dumps, thus the hit rate is very high.
If you are curious or doubtful about the proficiency of our 070-741 Practical Information preparation quiz, we can explain the painstakingly word we did behind the light. By abstracting most useful content into the 070-741 Practical Information exam materials, they have helped former customers gain success easily and smoothly. The most important part is that all contents were being sifted with diligent attention.
Microsoft 070-741 Practical Information - The secret of success is constancy to purpose.
With the rapid development of the economy, the demands of society on us are getting higher and higher. If you can have 070-741 Practical Information certification, then you will be more competitive in society. Our study materials will help you get the according certification you want to have. Believe me, after using our study materials, you will improve your work efficiency. You will get more opportunities than others, and your dreams may really come true in the near future. 070-741 Practical Information test guide will make you more prominent in the labor market than others, and more opportunities will take the initiative to find you.
The content of our 070-741 Practical Information pass guide covers the most of questions in the actual test and all you need to do is review our 070-741 Practical Information vce dumps carefully before taking the exam. Then you can pass the actual test quickly and get certification easily.
070-741 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory forest named adatum.com. The forest contains a server named Server1. Server1 has the DFS Namespaces role service installed and is configured as shown in the following exhibit.
\\Server1.adatum.com\namespace1 has a folder target named Folder1. A user named User1 has Full
Control share and NTFS permissions to Folder1.
Folder1 contains a file named File1.doc. User1 has only Write NTFS permissions to File1.doc.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
QUESTION NO: 2
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet.
You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names.
What should you name the zone on Server1?
A. NetBIOS
B. . (root)
C. GlobalNames
D. WINS
Answer: C
Explanation
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx
QUESTION NO: 3
You have three servers named Server1, Server2, and Server3 that run Windows Server 2016.
On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
The parameters for NIC2 on Server1 are shown in the following output.
Which ping request will result in a reply from the destination host?
A. From Server2, ping 192.168.15.1
B. From Server1, ping 172.16.0.1
C. From Server3, ping 192.168.15.1
D. From Server1, ping 172.16.0.35
Answer: A
QUESTION NO: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers configured as shown in the following table.
The contos.com zone contains delegations for east.contoso.com, west.contoso.com, and south.contoso.com.
All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2, you create a conditional forwarder for contoso.com and west.contoso.com. On
Server3, you create a conditional forwarder for contoso.com and east.contoso.com.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION NO: 5
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
A. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
B. From Windows PowerShell on Server1, run Set-VmNetworkAdapter cmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
Answer: B
Explanation
References: https://www.techsupportpk.com/2017/01/nic-teaming-in-hyper-v-on-windows-server-
2016.html To prepare the guest VM1 to run NIC Teaming at guest level, you have to reconfigure
VM1's network adapter setting:-Get-VM VM1 | Set-VMNetworkAdapter -AllowTeaming On
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmnetworkadapter
https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic
-teaming/create-a-new-nic-team-in-a-vm
In addition, there are many other advantages of our SAP C_TS462_2023 learning guide. Microsoft training pdf material is the valid tools which can help you prepare for the VMware 2V0-32.22 actual test. In fact, our Microsoft MS-700-KR exam materials provide comprehensive customers service, and our commitment to users does not end at the point of sale. This version of Microsoft SAP C_C4H62_2408 exam cram materials is rather powerful. So you have nothing to worry about, only to study with our IBM S2000-025 exam questions with full attention.
Updated: May 28, 2022