After your purchase of JN0-643 Prep learning engine, our system will send a link to your email in 5 to 10 minutes. You can contact our staff anytime and anywhere during the learning process. The staff of JN0-643 Prep study materials is online 24 hours a day, seven days a week. As a matter of fact, we receive thousands of the warm feedbacks to thank us for helping them pass the exam. Our JN0-643 Prep training guide has been well known in the market. Omgzlook is famous for our company made these JN0-643 Prep exam questions with accountability.
JNCIP JN0-643 So your error can be corrected quickly.
JNCIP JN0-643 Prep - Enterprise Routing and Switching, Professional (JNCIP-ENT) We hope to grow with you and help you get more success in your life. Many students often complain that they cannot purchase counseling materials suitable for themselves. A lot of that stuff was thrown away as soon as it came back.
Our passing rate may be the most attractive factor for you. Our JN0-643 Prep learning guide have a 99% pass rate. This shows what? As long as you use our products, you can pass the exam!
Juniper JN0-643 Prep - Now IT industry is more and more competitive.
JN0-643 Prep study materials can expedite your review process, inculcate your knowledge of the exam and last but not the least, speed up your pace of review dramatically. The finicky points can be solved effectively by using our JN0-643 Prep exam questions. With a high pass rate as 98% to 100% in this career, we have been the leader in this market and helped tens of thousands of our loyal customers pass the exams successfully. Just come to buy our JN0-643 Prep learning guide and you will love it.
If you have decided to upgrade yourself by passing Juniper certification JN0-643 Prep exam, then choosing Omgzlook is not wrong. Our Omgzlook promise you that you can pass your first time to participate in the Juniper certification JN0-643 Prep exam and get Juniper JN0-643 Prep certification to enhance and change yourself.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. Traffic destined for R2 will be blackholed.
B. Transit traffic will follow the R1-R2-R4 path.
C. Traffic destined for R2 will reach R2.
D. Transit traffic will follow the R1-R3-R4 path.
Answer: C,D
QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 5
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
IBM C1000-185 - So accordingly, we offer three versions of free demos for you to download. They continue to use their IT knowledge and rich experience to study the previous years exams of Juniper SAP C-S43-2023 and have developed practice questions and answers about Juniper SAP C-S43-2023 exam certification exam. You can feel assertive about your exam with our 100 guaranteed professional Salesforce DEX-450 practice engine for you can see the comments on the websites, our high-quality of our Salesforce DEX-450 learning materials are proved to be the most effective exam tool among the candidates. If you choose to sign up to participate in Juniper certification CompTIA CAS-004 exams, you should choose a good learning material or training course to prepare for the examination right now. And our Salesforce CRT-450 test guide benefit exam candidates by improving their ability of coping the exam in two ways, first one is their basic knowledge of it.
Updated: May 28, 2022