Once you choose our learning materials, your dream that you have always been eager to get Juniper certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our JN0-643 Answers exam questions can help you gain the desired social status and thus embrace success. Everybody knows that in every area, timing counts importantly. With the advantage of high efficiency, our JN0-643 Answers learning quiz helps you avoid wasting time on selecting the important and precise content from the broad information. Our JN0-643 Answers exam questions are your best choice.
JNCIP JN0-643 We are trying our best to meet your demands.
Our service staff will help you solve the problem about the JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Answers training materials with the most professional knowledge and enthusiasm. Therefore, our New Exam JN0-643 Questions Explanations study materials are attributive to high-efficient learning. The immediate downloading feature of our New Exam JN0-643 Questions Explanations study materials is an eminent advantage of our products.
Our JN0-643 Answers exam quiz is so popular not only for the high quality, but also for the high efficiency services provided which owns to the efforts of all our staffs. First of all, if you are not sure about the JN0-643 Answers exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy JN0-643 Answers study guide or not.
Juniper JN0-643 Answers - The rate of return will be very obvious for you.
The society has an abundance of capable people and there is a keen competition. Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever. Qualifications is just a stepping stone, and strength is the cornerstone which can secure your status. Juniper JN0-643 Answers certification exam is a popular IT certification, and many people want to have it. With it you can secure your career. Omgzlook's Juniper JN0-643 Answers exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance. Then you no longer need to worry about being fired by your boss.
Next, through my introduction, I hope you can have a deeper understanding of our JN0-643 Answers learning quiz. We really hope that our JN0-643 Answers practice engine will give you some help.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B
QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 4
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 5
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
Omgzlook Juniper Microsoft MS-900 exam training materials is the most effective way to pass the certification exam. VMware 2V0-71.23 - At home, you can use the computer and outside you can also use the phone. Would you like to pass Juniper HP HPE0-J68 test and to get HP HPE0-J68 certificate? Omgzlook can guarantee your success. Microsoft MB-920 - There are no additional ads to disturb the user to use the Enterprise Routing and Switching, Professional (JNCIP-ENT) qualification question. How do you do that? The method is very simple, that is to use Omgzlook Juniper SAP C-THR82-2405 dumps to prepare for your exam.
Updated: May 28, 2022