Huawei H31-161 Papers certification exam will definitely lead you to a better career prospects. Huawei H31-161 Papers exam can not only validate your skills but also prove your expertise. Omgzlook's Huawei H31-161 Papers exam training materials is a proven software. Omgzlook Huawei H31-161 Papers exam training materials bear with a large number of the exam questions you need, which is a good choice. The training materials can help you pass the certification. It can guarantee you 100% pass the exam.
HCIE-Carrier IP H31-161 This is a site of great help to you.
Would you like to attend Huawei H31-161 - HCIE-Carrier IP (Written) Papers certification exam? Certainly a lot of people around you attend this exam. We also offer a year of free updates. If you do not pass the exam, we will refund the full cost to you.
Are you worrying about how to pass Huawei H31-161 Papers test? Now don't need to worry about the problem. Omgzlook that committed to the study of Huawei H31-161 Papers certification exam for years has a wealth of experience and strong exam dumps to help you effectively pass your exam. Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method.
Huawei H31-161 Papers - The empty promise is not enough.
There is no reason to waste your time on a test. If you feel it is difficult to prepare for Huawei H31-161 Papers and need spend a lot of time on it, you had better use Omgzlook test dumps which will help you save lots of time. What's more, Omgzlook exam dumps can guarantee 100% pass your exam. There is no better certification training materials than Omgzlook dumps. Instead of wasting your time on preparing for H31-161 Papers exam, you should use the time to do significant thing. Therefore, hurry to visit Omgzlook to know more details. Miss the opportunity, you will regret it.
Omgzlook is a reliable study center providing you the valid and correct H31-161 Papers questions & answers for boosting up your success in the actual test. H31-161 Papers PDF file is the common version which many candidates often choose.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
For example like Huawei SAP C-TS422-2023 certification exam, it is a very valuable examination, which must help you realize your wishes. Do you feel anxiety about your coming Lpi 102-500 exam test? Do you want to find the valid and latest material for the Lpi 102-500 actual test? Omgzlook will help you and bring you to the right direction. You can easily download the free demo of SAP C-IEE2E-2404 brain dumps on our Omgzlook. It is very necessary for candidates to get valid Cisco 500-490 dumps collection because it can save your time and help you get succeed in IT filed by clearing Cisco 500-490 actual test. You just need to effectively review and pass Salesforce Sales-Cloud-Consultant exam successfully.
Updated: May 27, 2022