How to get the test H31-161 Format certification in a short time, which determines enough qualification certificates to test our learning ability and application level. This may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test H31-161 Format certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? Our H31-161 Format exam prep can be done with its high-efficient merit. Try it now! But they forgot to answer the other questions, our H31-161 Format training guide can help you solve this problem and get used to the pace. In order to help you control the H31-161 Format examination time, we have considerately designed a special timer to help your adjust the pace of answering the questions of the H31-161 Format study materials. If you want to get a comprehensive idea about our real H31-161 Format study materials.
HCIE-Carrier IP H31-161 It is absolutely trustworthy website.
So you totally can control the H31-161 - HCIE-Carrier IP (Written) Format study materials flexibly. Many times getting a right method is important and more efficient than spending too much time and money in vain. Our Omgzlook team devote themselves to studying the best methods to help you pass H31-161 Exam Registration exam certification.
Secondly, the price of our H31-161 Format learning guide is quite favourable than the other websites'. H31-161 Format study guide can bring you more than you wanted. After you have used our products, you will certainly have your own experience.
Huawei H31-161 Format - Stop hesitating.
Research indicates that the success of our highly-praised H31-161 Format test questions owes to our endless efforts for the easily operated practice system. Most feedback received from our candidates tell the truth that our H31-161 Format guide torrent implement good practices, systems as well as strengthen our ability to launch newer and more competitive products. Accompanying with our H31-161 Format exam dumps, we educate our candidates with less complicated Q&A but more essential information, which in a way makes you acquire more knowledge and enhance your self-cultivation. And our H31-161 Format exam dumps also add vivid examples and accurate charts to stimulate those exceptional cases you may be confronted with. You can rely on our H31-161 Format test questions, and we’ll do the utmost to help you succeed.
The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate H31-161 Format dumps torrent which are the best for passing certification test.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
First, you can see the high hit rate on the website that can straightly proved our Google Professional-Cloud-Developer study braindumps are famous all over the world. By using our online training, you may rest assured that you grasp the key points of Amazon SAA-C03-KR dumps torrent for the practice test. Each of them has their respective feature and advantage including new information that you need to know to pass the SAP E_S4CPE_2023 test. With the help of our study guide, you will save lots of time to practice Microsoft MD-102 vce pdf and boost confidence in solving the difficult questions. IBM S1000-007 - You will be cast in light of career acceptance and put individual ability to display.
Updated: May 27, 2022