Most people are nervous and anxious to take part in the 640-801 Blueprint exam for the first time. Then it is easy for them to make mistakes. So it is important to get familiar with the real test environment. As long as you pay for our 640-801 Blueprint study guide successfully, then you will receive it quickly. That is the expression of our efficiency. We believe this resulted from our constant practice, hard work and our strong team spirit.
CCNA 640-801 So Omgzlook a website worthy of your trust.
CCNA 640-801 Blueprint - Cisco Certified Network Associate (CCNA) The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. Do not spend too much time and money, as long as you have Omgzlook learning materials you will easily pass the exam. In order to help you more Omgzlook the Cisco Latest Test 640-801 Tutorial exam eliminate tension of the candidates on the Internet.
Software version-It support simulation test system, and times of setup has no restriction. Remember this version support Windows system users only. App online version-Be suitable to all kinds of equipment or digital devices.
Cisco 640-801 Blueprint - Our strength will make you incredible.
The secret that Omgzlook helps many candidates pass 640-801 Blueprint exam is Cisco exam questions attentively studied by our professional IT team for years, and the detailed answer analysis. We constantly updated the 640-801 Blueprint exam materials at the same time with the exam update. We try our best to ensure 100% pass rate for you.
The opportunity always belongs to a person who has the preparation. But, when opportunities arise, will you seize the opportunities successfully? At present, you are preparing for Cisco 640-801 Blueprint test.
640-801 PDF DEMO:
QUESTION NO: 1
Which line from the output of the show ip interface command indicates that there is a Layer 1 problem?
A.Serial0/1 is up, line protocol is up
B.Serial0/1 is up, line protocol is down
C.Serial0/1 is down, line protocol is down
D.Serial0/1 is administratively down, line protocol is down
Correct:C
QUESTION NO: 2
Refer to the topology and router output shown in the exhibit. A technician is troubleshooting host connectivity issues on the switches. The hosts in VLANs 10 and 15 on Sw11 are unable to communicate with hosts in the same VLANs on Sw12. Hosts in the Admin VLAN are able to communicate. The port-to-VLAN assignments are identical on the two switches. What could be the problem?
A.The Fa0/1 port is not operational on one of the switches.
B.The link connecting the switches has not been configured as a trunk.
C.At least one port needs to be configured in VLAN 1 for VLANs 10 and 15 to be able to communicate.
D.Port FastEthernet 0/1 needs to be configured as an access link on both switches.
E.A router is required for hosts on SW11 in VLANs 10 and 15 to communicate with hosts in the same
VLAN on Sw12.
Correct:B
QUESTION NO: 3
When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?
A.By default, all defined VLANs are allowed on the trunk.
B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.
C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.
D.Each single VLAN, or VLAN range, must be specified with the vlan database command.
Correct:A
QUESTION NO: 4
Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?
A.The Serial0/0 interface is passing traffic.
B.The DLCI 100 was dynamically allocated by the router.
C.The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server.
D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud.
E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through
Inverse ARP.
Correct:E
QUESTION NO: 5
An internetwork has been configured as shown in the diagram, with both routers using EIGRP routing for AS 44. Users on the Branch router are unable to reach any of the subnets on the HQ router. Which of the following commands is necessary to fix this problem?
A.Branch(config-router)# version 2
B.Branch(config-router)# no auto-summary
C.Branch(config-router)# redistribute eigrp 44
D.Branch(config-router)# eigrp log-neighbor-changes
E.Branch(config-router)# default-information originate
Correct:B
EMC D-CSF-SC-23 - So our Omgzlook will provide a exam simulation for you to experience the real exam model before real exam. And with the aid of EMC D-PCM-DY-23 certification test, you can improve your skills and master some useful techniques in your job so that you can finish your work better and demonstrate your great ability before other people. Also you can ask us any questions about SAP C-THR89-2405 exam any time as you like. With the dumps, you can pass Cisco IBM S2000-018 test with ease and get the certificate. Nutanix NCP-CI-AWS study guide is the best product to help you achieve your goal.
Updated: May 27, 2022