If you are still struggling to prepare for passing 350-401 Vce certification exam, at this moment Omgzlook can help you solve problem. Omgzlook can provide you training materials with good quality to help you pass the exam, then you will become a good Cisco 350-401 Vce certification member. If you have decided to upgrade yourself by passing Cisco certification 350-401 Vce exam, then choosing Omgzlook is not wrong. Free demos are understandable and part of the 350-401 Vce exam materials as well as the newest information for your practice. And because that our 350-401 Vce study guide has three versions: the PDF, Software and APP online. Maybe on other web sites or books, you can also see the related training materials.
CCNP Enterprise 350-401 Because it's really a great help to you.
CCNP Enterprise 350-401 Vce - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Though the content is the same, but their displays are totally different and functionable. In order to prevent your life from regret and remorse, you should seize every opportunity which can change lives passibly. Did you do it? Omgzlook's Cisco Latest 350-401 Dumps Free exam training materials can help you to achieve your success.
As well as our after-sales services. And we can always give you the most professional services on our 350-401 Vce training guide. Our 350-401 Vce practice questions enjoy great popularity in this line.
Cisco 350-401 Vce - So you need to be brave enough to have a try.
Most IT workers prefer to choose our online test engine for their 350-401 Vce exam prep because online version is more flexible and convenient. With the help of our online version, you can not only practice our 350-401 Vce exam pdf in any electronic equipment, but also make you feel the atmosphere of 350-401 Vce actual test. The exam simulation will mark your mistakes and help you play well in 350-401 Vce practice test.
And all of the PDF version, online engine and windows software of the 350-401 Vce study guide will be tested for many times. Although it is not easy to solve all technology problems, we have excellent experts who never stop trying.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
Our team always checked and revised Pegasystems PEGACPLSA23V1 dumps pdf to ensure the accuracy of our preparation study materials. The number of questions of the APM APM-PFQ study materials you have done has a great influence on your passing rate. Dear everyone, you can download the SAP C_S4FTR_2023 free demo for a little try. HashiCorp Terraform-Associate-003 - The high quality of our products also embodies in its short-time learning. We can guarantee you high passing score once you bought our HP HPE0-S60 real questions and remember the correct answers.
Updated: May 28, 2022