It is worthy for you to buy our 350-401 Valid quiz torrent and you can trust our product. You needn’t worry that our product can’t help you pass the exam and waste your money. We guarantee to you our 350-401 Valid exam materials can help you and you will have an extremely high possibility to pass the exam. 350-401 Valid exam dumps are so comprehensive that you do not need any other study material. The 350-401 Valid study material is all-inclusive and contains straightaway questions and answers comprising all the important topics in the actual 350-401 Valid demo vce. To cater to the needs of exam candidates, our experts have been assiduously worked for their quality day and night.
CCNP Enterprise 350-401 Your ability will be enhanced quickly.
CCNP Enterprise 350-401 Valid - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) We believe the operation is very convenient for you, and you can operate it quickly. Besides, we price the Latest 350-401 Test Pass4Sure actual exam with reasonable fee without charging anything expensive. We have a group of experts dedicated to the Latest 350-401 Test Pass4Sure exam questions for many years.
Differ as a result the 350-401 Valid questions torrent geared to the needs of the user level, cultural level is uneven, have a plenty of college students in school, have a plenty of work for workers, and even some low education level of people laid off, so in order to adapt to different level differences in users, the 350-401 Valid exam questions at the time of writing teaching materials with a special focus on the text information expression, as little as possible the use of crude esoteric jargon, as much as possible by everyone can understand popular words to express some seem esoteric knowledge, so that more users through the 350-401 Valid prep guide to know that the main content of qualification examination, stimulate the learning enthusiasm of the user, arouse their interest in learning.
Cisco 350-401 Valid - You still can pass the exam with our help.
Nowadays, using computer-aided software to pass the 350-401 Valid exam has become a new trend. Because the new technology enjoys a distinct advantage, that is convenient and comprehensive. In order to follow this trend, our company product such a 350-401 Valid exam questions that can bring you the combination of traditional and novel ways of studying. The passing rate of our study material is up to 99%. If you are not fortune enough to acquire the 350-401 Valid certification at once, you can unlimitedly use our product at different discounts until you reach your goal and let your dream comes true.
And you can free download the demos of the 350-401 Valid practice engine to have a experience before payment. During the operation of the 350-401 Valid study materials on your computers, the running systems of the 350-401 Valid study guide will be flexible, which saves you a lot of troubles and help you concentrate on study.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
And our Fortinet FCP_FCT_AD-7.2study materials have three formats which help you to read, test and study anytime, anywhere. We believe that if you purchase Tibco TCA-Tibco-BusinessWorks test guide from our company and take it seriously into consideration, you will gain a suitable study plan to help you to pass your exam in the shortest time. Which kind of Salesforce Sales-Cloud-Consultant certificate is most authorized, efficient and useful? We recommend you the Salesforce Sales-Cloud-Consultant certificate because it can prove that you are competent in some area and boost outstanding abilities. It means that if you do not persist in preparing for the SAP C-TS462-2023 exam, you are doomed to failure. At the same time, we believe that our SAP C-TS462-2022 training quiz will be very useful for you to have high quality learning time during your learning process.
Updated: May 28, 2022