Only high-class 350-401 Topics guide question like us can be your perfect choice. We offer free demos and updates if there are any for your reference beside real 350-401 Topics real materials. By downloading the free demos you will catch on the basic essences of our 350-401 Topics guide question and just look briefly at our practice materials you can feel the thoughtful and trendy of us. With such an efficient product, you really can't find the second one! In any case, many people have passed the exam after using 350-401 Topics training materials. And we are the leading practice materials in this dynamic market.
CCNP Enterprise 350-401 We have always advocated customer first.
CCNP Enterprise 350-401 Topics - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) At the same time, we have formed a group of passionate researchers and experts, which is our great motivation of improvement. We need to have more strength to get what we want, and 350-401 Latest Test Dumps Questions exam dumps may give you these things. After you use our study materials, you can get 350-401 Latest Test Dumps Questions certification, which will better show your ability, among many competitors, you will be very prominent.
When the online engine is running, it just needs to occupy little running memory. At the same time, all operation of the online engine of the 350-401 Topics training practice is very flexible as long as the network is stable. In order to save you a lot of installation troubles, we have carried out the online engine of the 350-401 Topics latest exam guide which does not need to download and install.
Cisco 350-401 Topics - So you must act from now.
When you try our part of Cisco certification 350-401 Topics exam practice questions and answers, you can make a choice to our Omgzlook. We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Cisco certification 350-401 Topics exam is Omgzlook.
Now Omgzlook provide you a effective method to pass Cisco certification 350-401 Topics exam. It will play a multiplier effect to help you pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
ISQI CT-AI_v1.0_World - Selecting Omgzlook, you will be an IT talent. Now you can free download part of practice questions and answers of Cisco certification Cisco 700-250 exam on Omgzlook. People who have got Cisco SAP C_SIGDA_2403 certification often have much higher salary than counterparts who don't have the certificate. Candidates who participate in the Cisco certification CompTIA SY0-601-KR exam should select exam practice questions and answers of Omgzlook, because Omgzlook is the best choice for you. Our Omgzlook expert team use their experience for many people participating in Cisco certification APMG-International AgileBA-Foundation exam to develope the latest effective training tools, which includes Cisco APMG-International AgileBA-Foundation certification simulation test, the current exam and answers.
Updated: May 28, 2022