The existence of our 350-401 Sample learning guide is regarded as in favor of your efficiency of passing the exam. Our 350-401 Sample exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best 350-401 Sample study materials so many exam candidates admire our generosity of offering help for them. Most importantly, these continuously updated systems are completely free to users. As long as our 350-401 Sample learning material updated, users will receive the most recent information from our 350-401 Sample learning materials. And we will send you the new updates if our experts make them freely.
CCNP Enterprise 350-401 Now IT industry is more and more competitive.
The finicky points can be solved effectively by using our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample exam questions. If you have decided to upgrade yourself by passing Cisco certification 350-401 Exam Study Guide exam, then choosing Omgzlook is not wrong. Our Omgzlook promise you that you can pass your first time to participate in the Cisco certification 350-401 Exam Study Guide exam and get Cisco 350-401 Exam Study Guide certification to enhance and change yourself.
So accordingly, we offer three versions of free demos for you to download. Our 350-401 Sample practice questions are on the cutting edge of this line with all the newest contents for your reference. Free demos are understandable and part of the 350-401 Sample exam materials as well as the newest information for your practice.
It contains Cisco Cisco 350-401 Sample exam questions and answers.
Students are worried about whether the 350-401 Sample practice materials they have purchased can help them pass the exam and obtain a certificate. They often encounter situations in which the materials do not match the contents of the exam that make them waste a lot of time and effort. But with 350-401 Sample exam dump, you do not need to worry about similar problems. Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of 350-401 Sample test guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers. In order to gain the trust of new customers, 350-401 Sample practice materials provide 100% pass rate guarantee for all purchasers. We have full confidence that you can successfully pass the exam as long as you practice according to the content provided by 350-401 Sample exam dump. Of course, if you fail to pass the exam, we will give you a 100% full refund.
So the website of Omgzlook can get the attention of a lot of candidates. They believe and rely on us.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco 300-435 - Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. We can help you pass the Cisco IBM C1000-177 exam smoothly. We provide our EMC D-ISM-FN-23 exam braindumps on the superior quality and being confident that they will help you expand your horizon of knowledge of the exam. AAPC CPC - Not every training materials on the Internet have such high quality. Snowflake SnowPro-Core - We are absolutely responsible for you.
Updated: May 28, 2022