Our windows software and online test engine of the 350-401 Resources exam questions are suitable for all age groups. At the same time, our operation system is durable and powerful. So you totally can control the 350-401 Resources study materials flexibly. Our Omgzlook team devote themselves to studying the best methods to help you pass 350-401 Resources exam certification. From the time when you decide whether to purchase our 350-401 Resources exam software or not, we have provided you with comprehensive guarantees, including free demo download before buying, payment guarantee in purchase process, one-year free update service after you purchased 350-401 Resources exam software, and full refund guarantee of dump cost if you fail 350-401 Resources exam certification, which are all our promises to ensure customer interests. 350-401 Resources study guide can bring you more than you wanted.
CCNP Enterprise 350-401 Time is nothing; timing is everything.
Research indicates that the success of our highly-praised 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Resources test questions owes to our endless efforts for the easily operated practice system. The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate 350-401 Reliable Test Dumps Free dumps torrent which are the best for passing certification test.
We did not gain our high appraisal by our 350-401 Resources exam practice for nothing and there is no question that our 350-401 Resources practice materials will be your perfect choice. First, you can see the high hit rate on the website that can straightly proved our 350-401 Resources study braindumps are famous all over the world. Secondly, you can free download the demos to check the quality, and you will be surprised to find we have a high pass rate as 98% to 100%.
Cisco 350-401 Resources - You can download our app on your mobile phone.
The Omgzlook product here is better, cheaper, higher quality and unlimited for all time; kiss the days of purchasing multiple Cisco braindumps repeatedly, or renewing 350-401 Resources training courses because you ran out of time. Now you can learn 350-401 Resources skills and theory at your own pace and anywhere you want with top of the 350-401 Resources braindumps, you will find it's just like a pice a cake to pass 350-401 Resourcesexam.
And our content of the 350-401 Resources exam questions are based on real exam by whittling down superfluous knowledge without delinquent mistakes. At the same time, we always keep updating the 350-401 Resources training guide to the most accurate and the latest.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
You can put all your queries and get a quick and efficient response as well as advice of our experts on ISQI CTFL_Syll_4.0 certification tests you want to take. During your transitional phrase to the ultimate aim, our Network Appliance NS0-604 study engine as well as these updates is referential. Dell D-PWF-DY-A-00 exam materials contain all the questions and answers to pass Dell D-PWF-DY-A-00 exam on first try. Our CIW 1D0-622 real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. As long as you choose our Fortinet FCP_FGT_AD-7.4 exam questions, you will get the most awarded.
Updated: May 28, 2022