The experts in our company have been focusing on the 350-401 Questions examination for a long time and they never overlook any new knowledge. The content of our 350-401 Questions study materials has always been kept up to date. We will inform you by E-mail when we have a new version. After you get more opportunities, you can make full use of your talents. You will also get more salary, and then you can provide a better life for yourself and your family. The client can decide which 350-401 Questions version to choose according their hobbies and their practical conditions.
CCNP Enterprise 350-401 So our customers can pass the exam with ease.
Our APP online version of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions exam questions has the advantage of supporting all electronic equipment. Our PDF version can be printed and you can take notes as you like. We know that every user has their favorite.
So if you buy our 350-401 Questions guide quiz, it will help you pass your exam and get the certification in a short time, and you will find that our 350-401 Questions study materials are good value for money. Besides, you can enjoy the best after-sales service. We believe that our 350-401 Questions learning engine will meet your all needs.
Cisco 350-401 Questions - So our product is a good choice for you.
Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our 350-401 Questions learning guide in the international market, thus there are three different versions of our 350-401 Questions exam materials which are prepared to cater the different demands of various people. It is worth mentioning that, the simulation test is available in our software version. With the simulation test, all of our customers will get accustomed to the 350-401 Questions exam easily, and get rid of bad habits, which may influence your performance in the real 350-401 Questions exam. In addition, the mode of 350-401 Questions learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 350-401 Questions test questions would be absorbed, which is time-saving and high-efficient.
Under the help of our 350-401 Questions exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
And then you can start your study after downloading the WGU Integrated-Physical-Sciences exam questions in the email attachments. If any problems or doubts about our Snowflake COF-C02 exam torrent exist, please contact our customer service personnel online or contact us by mails and we will reply you and solve your doubts immediately. Though at first a lot of our new customers didn't believe our ACFCS CFCS exam questions, but they have became the supporters now. It’s our responsibility to offer instant help to every user on our Huawei H13-821_V3.0-ENU exam questions. As a result, many customers get manifest improvement and lighten their load by using our HP HPE0-S60 actual exam.
Updated: May 28, 2022