In the course of your study, the test engine of 350-401 Questions actual exam will be convenient to strengthen the weaknesses in the learning process. This can be used as an alternative to the process of sorting out the wrong questions of 350-401 Questions learning guide in peacetime learning, which not only help you save time, but also makes you more focused in the follow-up learning process with our 350-401 Questions learning materials. Just add it to your cart. Our website gives detailed guidance to our candidates for the preparations of 350-401 Questions actual test and lead them toward the direction of success. As a key to the success of your life, the benefits that our 350-401 Questions study braindumps can bring you are not measured by money.
CCNP Enterprise 350-401 Trust us and you will get success for sure!
As long as you follow with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions study guide, you are doomed to achieve your success. We would like to provide our customers with different kinds of 350-401 Examcollection Dumps practice guide to learn, and help them accumulate knowledge and enhance their ability. Besides, we guarantee that the 350-401 Examcollection Dumps exam questions of all our users can be answered by professional personal in the shortest time with our 350-401 Examcollection Dumps study dumps.
Every addition or subtraction of 350-401 Questions exam questions in the exam syllabus is updated in our braindumps instantly. Practice on real 350-401 Questions exam questions and we have provided their answers too for your convenience. If you put just a bit of extra effort, you can score the highest possible score in the real 350-401 Questions exam because our 350-401 Questions exam preparation dumps are designed for the best results.
Cisco 350-401 Questions - And we have become a popular brand in this field.
According to various predispositions of exam candidates, we made three versions of our 350-401 Questions study materials for your reference: the PDF, Software and APP online. And the content of them is the same though the displays are different. Untenable materials may waste your time and energy during preparation process. But our 350-401 Questions practice braindumps are the leader in the market for ten years. As long as you try our 350-401 Questions exam questions, we believe you will fall in love with it.
For many people, it’s no panic passing the 350-401 Questions exam in a short time. Luckily enough，as a professional company in the field of 350-401 Questions practice questions ,our products will revolutionize the issue.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We guarantee that you can pass the exam at one time even within one week based on practicing our Microsoft MB-230 exam materials regularly. The most attraction aspect is that our high pass rate of our Microsoft MB-220 study materials as 98% to 100%. And you cannot miss the opportunities this time for as the most important and indispensable practice materials in this line, we have confidence in the quality of our CompTIA PT0-002 practice materials, and offer all after-sales services for your consideration and acceptance. Time and tide wait for no man, if you want to save time, please try to use our SAP C-TS414-2023 preparation exam, it will cherish every minute of you and it will help you to create your life value. CheckPoint 156-315.81 - You also can refer to other candidates’ review guidance, which might give you some help.
Updated: May 28, 2022