Time and tide wait for no man, if you want to save time, please try to use our 350-401 Preview preparation exam, it will cherish every minute of you and it will help you to create your life value. With the high pass rate of our 350-401 Preview exam questions as 98% to 100% which is unbeatable in the market, we are proud to say that we have helped tens of thousands of our customers achieve their dreams and got their 350-401 Preview certifications. Join us and you will be one of them. Then we can offer you a variety of learning styles. Our printable 350-401 Preview real exam dumps, online engine and windows software are popular among candidates. To be convenient for the learners, our 350-401 Preview certification questions provide the test practice software to help the learners check their learning results at any time.
CCNP Enterprise 350-401 You must feel scared and disappointed.
Just study with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Preview exam braindumps 20 to 30 hours, and you will be able to pass the exam. our Reliable 350-401 Dumps Sheet study materials will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our Reliable 350-401 Dumps Sheet study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our Reliable 350-401 Dumps Sheet study materials better.
To meet the needs of users, and to keep up with the trend of the examination outline, our products will provide customers with larest version of our products. Our company's experts are daily testing our 350-401 Preview study guide for timely updates. So we solemnly promise the users, our products make every effort to provide our users with the latest learning materials.
Cisco 350-401 Preview study materials are here waiting for you!
Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me "yes", then I will tell you a good news that you're in luck. Omgzlook's Cisco 350-401 Preview exam training materials can help you 100% pass the exam. This is a real news. If you want to scale new heights in the IT industry, select Omgzlook please. Our training materials can help you pass the IT exams. And the materials we have are very cheap. Do not believe it, see it and then you will know.
We will adopt and consider it into the renovation of the 350-401 Preview exam guide. Anyway, after your payment, you can enjoy the one-year free update service with our guarantee.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
AACN CCRN-Adult - So the choice is important. Besides, the price of our Google Professional-Cloud-Developer learning guide is very favourable even the students can afford it. With it, you will be pass the Cisco ASQ CQE-KR exam certification which is considered difficult by a lot of people. APEGS NPPE - And we are grimly determined and confident in helping you. After you used Omgzlook Cisco Huawei H13-821_V3.0 dumps, you still fail in Huawei H13-821_V3.0 test and then you will get FULL REFUND.
Updated: May 28, 2022