We hold coherent direction with our exam candidates, so our 350-401 Ppt study materials are compiled in modern format. Many competitors simulate and strive to emulate our standard, but our 350-401 Ppt training branindumps outstrip others in many aspects, so it is incumbent on us to offer help. Considering the current plea of our exam candidates we make up our mind to fight for your satisfaction and wish to pass the 350-401 Ppt exam. So our 350-401 Ppt learning questions will be your indispensable practice materials during your way to success. Although the 350-401 Ppt exam prep is of great importance, you do not need to be over concerned about it. There is an old saying goes, the customer is king, so we follow this principle with dedication to achieve high customer satisfaction on our 350-401 Ppt exam questions.
CCNP Enterprise 350-401 The downloading process is operational.
Nowadays, having knowledge of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Ppt study braindumps become widespread, if you grasp solid technological knowledge, you are sure to get a well-paid job and be promoted in a short time. As a result, many students have bought materials that are not suitable for them and have wasted a lot of money. But Real 350-401 Dumps guide torrent will never have similar problems, not only because Real 350-401 Dumps exam torrent is strictly compiled by experts according to the syllabus, which are fully prepared for professional qualification examinations, but also because Real 350-401 Dumps guide torrent provide you with free trial services.
As long as you spare one or two hours a day to study with our latest 350-401 Ppt quiz prep, we assure that you will have a good command of the relevant knowledge before taking the exam. What you need to do is to follow the 350-401 Ppt exam guide system at the pace you prefer as well as keep learning step by step. Under the support of our study materials, passing the exam won’t be an unreachable mission.
Cisco 350-401 Ppt - Join us soon.
Up to now, there are three versions of 350-401 Ppt exam materials for your choice. So high-quality contents and flexible choices of 350-401 Ppt learning mode will bring about the excellent learning experience for you. Though the content of these three versions of our 350-401 Ppt study questions is the same, their displays are totally different. And you can be surprised to find that our 350-401 Ppt learning quiz is developed with the latest technologies as well.
The good news is that according to statistics, under the help of our 350-401 Ppt learning dumps, the pass rate among our customers has reached as high as 98% to 100%. It is strongly proved that we are professonal in this career and our 350-401 Ppt exam braindumps are very popular.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
This time set your mind at rest with the help of our American College of Rheumatology RhMSUS guide quiz. Many clients may worry that their privacy information will be disclosed while purchasing our Salesforce Sales-Cloud-Consultant quiz torrent. Any difficult posers will be solved by our Huawei H28-153_V1.0 quiz guide. And if you find that your version of the Amazon DOP-C02-KR practice guide is over one year, you can enjoy 50% discount if you buy it again. During your use of our Microsoft DP-203 learning materials, we also provide you with 24 hours of free online services.
Updated: May 28, 2022