350-401 Pdf - Cisco Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Reliable Test Blueprint - Omgzlook

If you require any further information about either our 350-401 Pdf preparation exam or our corporation, please do not hesitate to let us know. High quality 350-401 Pdf practice materials leave a good impression on the exam candidates and bring more business opportunities in the future. And many of our cutomers use our 350-401 Pdf exam questions as their exam assistant and establish a long cooperation with us. Our experienced team of IT experts through their own knowledge and experience continue to explore the exam information. It contains the real exam questions, if you want to participate in the Cisco 350-401 Pdf examination certification, select Omgzlook is unquestionable choice. Provided that you lose your exam with our 350-401 Pdf exam questions unfortunately, you can have full refund or switch other version for free.

CCNP Enterprise 350-401 But it doesn't matter.

Through this we can know that Omgzlook Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Pdf exam training materials can brought help to the candidates. To address this issue, our New Test 350-401 Camp Sheet actual exam offers three different versions for users to choose from. The PC version is the closest to the real test environment, which is an excellent choice for windows - equipped computers.

As the top-rated exam in IT industry, 350-401 Pdf certification is one of the most important exams. With 350-401 Pdf certificate, you can get more benefits. If you want to attend the exam, Omgzlook Cisco 350-401 Pdf questions and answers can offer you convenience.

Now Cisco Cisco 350-401 Pdf certification test is very popular.

No matter in the day or on the night, you can consult us the relevant information about our 350-401 Pdf preparation exam through the way of chatting online or sending emails. I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our 350-401 Pdf study materials. And we will give you the most considerate suggestions on our 350-401 Pdf learning guide with all our sincere and warm heart.

So our IT technicians of Omgzlook take more efforts to study 350-401 Pdf exam materials. All exam software from Omgzlook is the achievements of more IT elite.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 5
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

Pegasystems PEGACPBA88V1 - The clients abroad only need to fill in correct mails and then they get our products conveniently. Our Omgzlook devote themselves for years to develop the SAP C_S4PPM_2021 exam software to help more people who want to have a better development in IT field to pass SAP C_S4PPM_2021 exam. If you buy the ISTQB ISTQB-CTFL training files from our company, you will have the right to enjoy the perfect service. Our Network Appliance NS0-404 training dumps cover nearly 85% real test materials so that if you master our dumps questions and answers you can clear exams successfully. You can rest assured to buy the Cisco 300-445 exam dumps from our company.

Updated: May 28, 2022