Our three versions of 350-401 Materials study materials are the PDF, Software and APP online. They have their own advantages differently and their prolific 350-401 Materials practice materials can cater for the different needs of our customers, and all these 350-401 Materials simulating practice includes the new information that you need to know to pass the test for we always update it in the first time. So you can choose them according to your personal preference. Our company is rated as outstanding enterprise. And at the same time, our website have became a famous brand in the market. Our experts are researchers who have been engaged in professional qualification 350-401 Materials exams for many years and they have a keen sense of smell in the direction of the examination.
CCNP Enterprise 350-401 The rate of return will be very obvious for you.
Omgzlook's Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Materials exam training materials is a good training tool. Next, through my introduction, I hope you can have a deeper understanding of our New 350-401 Test Lab Questions learning quiz. We really hope that our New 350-401 Test Lab Questions practice engine will give you some help.
Omgzlook Cisco 350-401 Materials exam training materials is the most effective way to pass the certification exam. With this certification, you will achieve your dreams, and become successful. The curtain of life stage may be opened at any time, the key is that you are willing to show, or choose to avoid.
Cisco 350-401 Materials - You can really try it we will never let you down!
As a IT worker sometime you may know you will take advantage of new technology more quickly by farming out computer operations, we prefer to strengthen own strong points. Our 350-401 Materials test braindump materials is popular based on that too. As we all know the passing rate for IT exams is low, the wise choice for candidates will select valid 350-401 Materials test braindump materials to make you pass exam surely and fast. Professional handles professional affairs.
Our highly efficient operating system for learning materials has won the praise of many customers. If you are determined to purchase our 350-401 Materials study tool, we can assure you that you can receive an email from our efficient system within 5 to 10 minutes after your payment, which means that you do not need to wait a long time to experience our learning materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
The intelligence of the Salesforce CRT-251 test engine has inspired the enthusiastic for the study. Microsoft AZ-800 - Only firm people will reach the other side. No need to doubt and worry, thousands of candidates choose our exam training materials, you shouldn't miss this high pass-rate Google Professional-Machine-Learning-Engineer training PDF materials. Our experts made significant contribution to their excellence of the AACN CCRN-Adult study materials. All SAP P-SAPEA-2023 test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation.
Updated: May 28, 2022