350-401 Guide & Cisco Real 350-401 Torrent - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Omgzlook

But the mystery is quite challenging to pass 350-401 Guide exam unless you have an updated exam material. Thousands of people attempt 350-401 Guide exam but majorly fails despite of having good professional experience, because only practice and knowledge isn’t enough a person needs to go through the exam material designed by Cisco, otherwise there is no escape out of reading. Well, you have landed at the right place; Omgzlook offers your experts designed material which will gauge your understanding of various topics. You deserve this opportunity to win and try to make some difference in your life if you want to attend the 350-401 Guide exam and get the certification by the help of our 350-401 Guide practice braindumps. As we all know, all companies will pay more attention on the staffs who have more certifications which is a symbol of better understanding and efficiency on the job. The simple and easy-to-understand language of 350-401 Guide guide torrent frees any learner from studying difficulties.

CCNP Enterprise 350-401 Also it is good for releasing pressure.

CCNP Enterprise 350-401 Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Those considerate services are thoughtful for your purchase experience and as long as you need us, we will solve your problems. These Cisco New 350-401 Visual Cert Test exam dumps are authentic and help you in achieving success. Do not lose hope and only focus on your goal if you are using New 350-401 Visual Cert Test dumps.

It is a popular belief that only processional experts can be the leading one to do some adept job. And similarly, only high quality and high accuracy 350-401 Guide exam questions like ours can give you confidence and reliable backup to get the certificate smoothly because our experts have extracted the most frequent-tested points for your reference. Good practice materials like our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question can educate exam candidates with the most knowledge.

Cisco 350-401 Guide - We strongly advise you to have a brave attempt.

Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam tests are a high-quality product recognized by hundreds of industry experts. Over the years, 350-401 Guide exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. It can be said that 350-401 Guide test guide is the key to help you open your dream door. We have enough confidence in our products, so we can give a 100% refund guarantee to our customers. 350-401 Guide exam questions promise that if you fail to pass the exam successfully after purchasing our product, we are willing to provide you with a 100% full refund.

If you want to find a desirable job, you must rely on your ability to get the job. Now, our 350-401 Guide training materials will help you master the popular skills in the office.

350-401 PDF DEMO:

QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

But if the clients buy our Google Professional-Cloud-Network-Engineer training quiz they can immediately use our product and save their time. In order to survive in the society and realize our own values, learning our Juniper JN0-649 practice engine is the best way. Fortinet FCP_FCT_AD-7.2 - Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate. And soon you can get Cisco certification Microsoft MB-310 exam certificate. SAP C-THR70-2404 - For example, the software version can simulate the real exam environment.

Updated: May 28, 2022