Our 350-401 Exams real dumps has received popular acceptance worldwide with tens of thousands of regular exam candidates who trust our proficiency. Up to now, the passing rate is 98 to 100 percent. What made our 350-401 Exams study guide so amazing? The answer that we only supply the latest and valid 350-401 Exams exam braindumps for our customers and first-class after-sales services come after the first-class 350-401 Exams learning engine. With this training materials, you will speed up the pace of success, and you will be more confident. Cisco 350-401 Exams certification exam is very important for every IT person. In a word, Wwe have data protection act for you to avoid information leakage!
It is possible for you to easily pass 350-401 Exams exam.
our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exams exam guide has not equivocal content that may confuse exam candidates. There are more and more people to participate in 350-401 Reliable Test Collection Materials certification exam, and how to win in the increasingly competitive situation? To chose the right hand is the key. Our Omgzlook team has studies the 350-401 Reliable Test Collection Materials certification exam for years so that we have in-depth knowledge of the test.
It is known to us that to pass the 350-401 Exams exam is very important for many people, especially who are looking for a good job and wants to have a 350-401 Exams certification. Because if you can get a certification, it will be help you a lot, for instance, it will help you get a more job and a better title in your company than before, and the 350-401 Exams certification will help you get a higher salary. We believe that our company has the ability to help you successfully pass your exam and get a 350-401 Exams certification by our 350-401 Exams exam torrent.
Cisco 350-401 Exams - At first, it can be only used on PC.
Different from other similar education platforms, the 350-401 Exams quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. How users improve their learning efficiency is greatly influenced by the scientific and rational design and layout of the learning platform. The Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prepare torrent is absorbed in the advantages of the traditional learning platform and realize their shortcomings, so as to develop the 350-401 Exams test material more suitable for users of various cultural levels. If just only one or two plates, the user will inevitably be tired in the process of learning on the memory and visual fatigue, and the 350-401 Exams test material provided many study parts of the plates is good enough to arouse the enthusiasm of the user, allow the user to keep attention of highly concentrated.
Our 350-401 Exams free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our 350-401 Exams real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 350-401 Exams exam pdf.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We will send our Citrix 1Y0-204 exam guide within 10 minutes after your payment. There are three versions according to your study habit and you can practice our SAP C_TS414_2023 dumps pdf with our test engine that help you get used to the atmosphere of the formal test. Since the SAP C-SIGPM-2403 study quiz is designed by our professionals who had been studying the exam all the time according to the changes of questions and answers. IBM C1000-184 - With the quick development of the eletronic products, more and more eletronic devices are designed to apply to our life. The experts in our company are always keeping a close eye on even the slightest change on the Microsoft AZ-104-KR exam questions in the field.
Updated: May 28, 2022