Although everyone hopes to pass the exam, the difficulties in preparing for it should not be overlooked. There are plenty of people who took a lot of energy and time but finally failed to pass. You really need our 350-401 Exam practice materials which can work as the pass guarantee. We want to finish long term objectives through customer satisfaction and we have achieved it already by our excellent 350-401 Exam exam questions. In this era of cut throat competition, we are successful than other competitors. Obtaining the 350-401 Exam certification is not an easy task.
CCNP Enterprise 350-401 Selecting Omgzlook means choosing a success
CCNP Enterprise 350-401 Exam - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Our study materials want every user to understand the product and be able to really get what they need. You can free download part of Omgzlook's practice questions and answers about Cisco certification 350-401 Test Certification Cost exam online, as an attempt to test our quality. As long as you choose to purchase Omgzlook's products, we will do our best to help you pass Cisco certification 350-401 Test Certification Cost exam disposably.
As we all know, 350-401 Exam certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of 350-401 Exam certification now is higher and higher. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our 350-401 Exam training materials.
Cisco 350-401 Exam - Omgzlook guarantee 100% success.
Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our 350-401 Exam actual exam. Not only will we fully consider for customers before and during the purchase on our 350-401 Exam practice guide, but we will also provide you with warm and thoughtful service on the 350-401 Exam training guide.
If you find any quality problems of our 350-401 Exam or you do not pass the exam, we will unconditionally full refund. Omgzlook is professional site that providing Cisco 350-401 Exam questions and answers , it covers almost the 350-401 Exam full knowledge points.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
As we have three different kinds of the APMG-International AgileBA-Foundation practice braindumps, accordingly we have three kinds of the free demos as well. HP HPE0-V28-KR - Omgzlook has been to make the greatest efforts to provide the best and most convenient service for our candidates. MuleSoft MCD-Level-2 - We have shown the rest two versions on our website. Cisco 820-605 - And its price is very reasonable, you will benefit from it. Just have a try on our CheckPoint 156-315.81 practice guide, then you will know you can succeed.
Updated: May 28, 2022