The normal model test and understandable answer analysis will make you secretly master the exam skills to pass 350-401 Ebook exam. In order to reduce more stress for you, we promise you if you fail the exam, what you need to do is to send your scanned unqualified transcripts to our email box. After confirmation, we will immediately refund all the money that you purchased the 350-401 Ebook exam materials. The trial demo of our 350-401 Ebook question torrent must be a good choice for you. By the trial demo provided by our company, you will have the opportunity to closely contact with our 350-401 Ebook exam torrent, and it will be possible for you to have a view of our products. In addition, except 350-401 Ebook, many other certification exams are also useful.
CCNP Enterprise 350-401 We provide one-year customer service; 4.
CCNP Enterprise 350-401 Ebook - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) It is never too late to change. If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 New Study Plan exam review questions and you will clear exams.
There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. More and more workers have to spend a lot of time on meeting the challenge of gaining the 350-401 Ebook certification by sitting for an exam. It is known to us that more and more companies start to pay high attention to the 350-401 Ebook certification of the candidates.
Cisco 350-401 Ebook - You can take advantage of the certification.
Our 350-401 Ebook exam review contains the latest test questions and accurate answers along with the professional explanations. A little attention to prepare 350-401 Ebook practice test will improve your skills to clear exam with high passing score. For most busy IT workers, 350-401 Ebook dumps pdf is the best alternative to your time and money to secure the way of success in the IT filed.
Our 350-401 Ebook study materials allow you to improve your competitiveness in a short period of time. With the help of our 350-401 Ebook guide prep, you will be the best star better than others.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
You can find latest Cisco 700-250 test answers and questions in our pass guide and the detailed explanations will help you understand the content easier. In order to facilitate the user real-time detection of the learning process, we Network Appliance NS0-163 exam material provideds by the questions and answers are all in the past.it is closely associated, as our experts in constantly update products every day to ensure the accuracy of the problem, so all Network Appliance NS0-163 practice materials are high accuracy. As the questions of our EMC D-VXR-DY-01 exam dumps are involved with heated issues and customers who prepare for the EMC D-VXR-DY-01 exams must haven’t enough time to keep trace of EMC D-VXR-DY-01 exams all day long. Our study materials can let users the most closed to the actual test environment simulation training, let the user valuable practice effectively on Netskope NSK101 practice guide, thus through the day-to-day practice, for users to develop the confidence to pass the exam. Cisco 200-301-KR - The high quality and high pass rate has bbecome a reason for thousand of candidates to choose.
Updated: May 28, 2022