Why we let you try our 350-401 Ebook exam software free demo before you purchase? Why we can give you a promise that we will fully refund the money you purchased our software if you fail 350-401 Ebook exam with our dump? Because we believe that our products can make you success. As the 350-401 Ebook exam continues to update, our software will be always updating with it. And you will find it is quite fast and convenient. Our 350-401 Ebook real exam has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent. In order to make you be rest assured to buy our 350-401 Ebook exam software, we provide the safest payment method –PayPal payment.
CCNP Enterprise 350-401 Perhaps you do not understand.
Why the clients speak highly of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Ebook exam dump? Our dedicated service, high quality and passing rate and diversified functions contribute greatly to the high prestige of our products. As long as you are convenient, you can choose to use a computer to learn, you can also choose to use mobile phone learning. No matter where you are, you can choose your favorite equipment to study our 350-401 New Braindumps Free learning materials.
Our 350-401 Ebook study guide can help you improve in the shortest time. Even you do not know anything about the 350-401 Ebook exam. It absolutely has no problem.
Cisco 350-401 Ebook - Our users are willing to volunteer for us.
In order to meet a wide range of tastes, our company has developed the three versions of the 350-401 Ebook preparation questions, which includes PDF version, online test engine and windows software. According to your own budget and choice, you can choose the most suitable one for you. And if you don't know which one to buy, you can free download the demos of the 350-401 Ebook study materials to check it out. The demos of the 350-401 Ebook exam questions are a small part of the real exam questions.
We will inform you that the 350-401 Ebook study materials should be updated and send you the latest version in a year after your payment. We will also provide some discount for your updating after a year if you are satisfied with our 350-401 Ebook exam prepare.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In order to provide a convenient study method for all people, our company has designed the online engine of the SAP C_THR88_2405 study practice dump. And our SAP C_CPE_16 study materials always contain the latest exam Q&A. Also, from an economic point of view, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam dumps is priced reasonable, so the Microsoft AZ-140 test material is very responsive to users, user satisfaction is also leading the same products. Microsoft PL-300-KR - Everything you do will help you successfully pass the exam and get the card. After we use our Fortinet NSE5_FSM-6.3 study materials, we can get the Fortinet NSE5_FSM-6.3 certification faster.
Updated: May 28, 2022