Omgzlook dumps has high hit rate that will help you to pass Cisco 350-401 Duration test at the first attempt, which is a proven fact. So, the quality of Omgzlook practice test is 100% guarantee and Omgzlook dumps torrent is the most trusted exam materials. If you won't believe us, you can visit our Omgzlook to experience it. Besides the books, internet is considered to be a treasure house of knowledge. In Omgzlook you can find your treasure house of knowledge. There are several possibilities to get ready for 350-401 Duration test, but using good tools is the most effective method.
CCNP Enterprise 350-401 We can make you have a financial windfall.
Are you worrying about how to pass Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Duration test? Now don't need to worry about the problem. We can guarantee that you can pass the Cisco 350-401 Valid Exam Dumps Pdf exam the first time. If you buy the goods of Omgzlook, then you always be able to get newer and more accurate test information.
What we provide for you is the latest and comprehensive 350-401 Duration exam dumps, the safest purchase guarantee and the immediate update of 350-401 Duration exam software. Free demo download can make you be rest assured to buy; one-year free update of 350-401 Duration exam software after payment can assure you during your preparation for the exam. What's more, what make you be rest assured most is that we develop the exam software which will help more candidates get 350-401 Duration exam certification.
Cisco 350-401 Duration - The empty promise is not enough.
There is no reason to waste your time on a test. If you feel it is difficult to prepare for Cisco 350-401 Duration and need spend a lot of time on it, you had better use Omgzlook test dumps which will help you save lots of time. What's more, Omgzlook exam dumps can guarantee 100% pass your exam. There is no better certification training materials than Omgzlook dumps. Instead of wasting your time on preparing for 350-401 Duration exam, you should use the time to do significant thing. Therefore, hurry to visit Omgzlook to know more details. Miss the opportunity, you will regret it.
If you are tired with the screen for study, you can print the 350-401 Duration pdf dumps into papers. With the pdf papers, you can write and make notes as you like, which is very convenient for memory.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
For example like Cisco SAP C-TS4CO-2023 certification exam, it is a very valuable examination, which must help you realize your wishes. Do you feel anxiety about your coming California Department of Insurance CA-Life-Accident-and-Health exam test? Do you want to find the valid and latest material for the California Department of Insurance CA-Life-Accident-and-Health actual test? Omgzlook will help you and bring you to the right direction. You can easily download the free demo of ISACA CISM-CN brain dumps on our Omgzlook. Passing real exam is not easy task so many people need to take professional suggestions to prepare IAM IAM-Certificate practice exam. You just need to effectively review and pass MuleSoft MCPA-Level-1 exam successfully.
Updated: May 28, 2022