350-401 Braindumps - 350-401 Latest Free Study Guide & Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Omgzlook

There is no chance of losing the exam if you rely on 350-401 Braindumps study guides. If you do not get through the exam, you take back your money. The money offer is the best evidence on the remarkable content of 350-401 Braindumps. you can discover the quality of our exam dumps as well as the varied displays that can give the most convenience than you can ever experience. Both of the content and the displays are skillfully design on the purpose that 350-401 Braindumps actual exam can make your learning more targeted and efficient. We guarantee that you will be able to pass the 350-401 Braindumps in the first attempt.

CCNP Enterprise 350-401 The knowledge you have learned is priceless.

You can much more benefited form our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Braindumps study guide. To choose us is to choose success! It is an incredible opportunity among all candidates fighting for the desirable exam outcome to have our 350-401 Reliable Test Guide Files practice materials.

But the 350-401 Braindumps test prep we provide are compiled elaborately and it makes you use less time and energy to learn and provide the study materials of high quality and seizes the focus the exam. It lets you master the most information and costs you the least time and energy. The 350-401 Braindumps prep torrent we provide will cost you less time and energy.

Cisco 350-401 Braindumps - You must make a decision as soon as possible!

If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 350-401 Braindumps preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 350-401 Braindumps study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 350-401 Braindumps certification.

Next, I will detail the relevant information of our learning materials so that you can have a better understanding of our 350-401 Braindumps guide training. Our 350-401 Braindumps study tool prepared by our company has now been selected as the secret weapons of customers who wish to pass the exam and obtain relevant certification.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

SAP C_TS422_2023 - The client only need to spare 1-2 hours to learn our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question each day or learn them in the weekends. APMG-International Better-Business-Cases-Practitioner - We just want to provide you with the best service. ISTQB CT-AI - As a matter of fact, we receive thousands of the warm feedbacks to thank us for helping them pass the exam. Omgzlook is famous for our company made these Huawei H13-527_V5.0 exam questions with accountability. But our SAP C-THR81-2405 study guide will offer you the most professional guidance.

Updated: May 28, 2022