So, there is considerate and concerted cooperation for your purchasing experience accompanied with patient staff with amity. You can find them on our official website, and we will deal with everything once your place your order. To make your review more comfortable and effective, we made three versions as well as a series of favorable benefits for you. Comparing to other dumps vendors, the price of our 350-401 Book questions and answers is reasonable for every candidate. You will grasp the overall knowledge points of 350-401 Book actual test with our pass guide and the accuracy of our 350-401 Book exam answers will enable you spend less time and effort. New questions will be added into the study materials, unnecessary questions will be deleted from the 350-401 Book exam simulation.
CCNP Enterprise 350-401 It is enough to help you to easily pass the exam.
If you are a diligent person, we strongly advise you to try our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Book real test. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Omgzlook's Cisco 350-401 Valid Test Vce exam training materials.
In our software version of the 350-401 Book exam dumps, the unique point is that you can take part in the practice test before the real 350-401 Book exam. You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Book exam.
Cisco 350-401 Book - In fact we have no limit for computer quantity.
The clients only need 20-30 hours to learn the 350-401 Book exam questions and prepare for the test. Many people may complain that we have to prepare for the 350-401 Book test but on the other side they have to spend most of their time on their most important things such as their jobs, learning and families. But if you buy our 350-401 Book study guide you can both do your most important thing well and pass the test easily because the preparation for the test costs you little time and energy.
High quality and accurate of 350-401 Book pass guide will be 100% guarantee to clear your test and get the certification with less time and effort. Our valid 350-401 Book exam dumps will provide you with free dumps demo with accurate answers that based on the real exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
CIW 1D0-623 - There are some loopholes or systemic problems in the use of a product, which is why a lot of online products are maintained for a very late period. Updated EMC D-OME-OE-A-24 vce dumps ensure the accuracy of learning materials and guarantee success of in your first attempt. As is known to all, our Salesforce Salesforce-Contact-Center simulating materials are high pass-rate in this field, that's why we are so famous. Microsoft MB-500 - Omgzlook enjoys the reputation of a reliable study material provider to those professionals who are keen to meet the challenges of industry and work hard to secure their positions in it. If you prepare with our IBM C1000-162 actual exam for 20 to 30 hours, the IBM C1000-162 exam will become a piece of cake in front of you.
Updated: May 28, 2022