After you use our dumps, you will believe what I am saying. To effectively getting ready for Cisco 350-401 Answers test, do you know what tools are worth using? Let me tell you. Omgzlook Cisco 350-401 Answers pdf dumps are the most credible. Most of these questions are likely to appear in the 350-401 Answers real exam. Once you learn all 350-401 Answers questions and answers in the study guide, try Omgzlook's innovative testing engine for exam like 350-401 Answers practice tests. And then are what materials your worthwhile option? Do you have chosen Omgzlook Cisco 350-401 Answers real questions and answers? If so, you don't need to worry about the problem that can't pass the exam.
CCNP Enterprise 350-401 At first, it can be only used on PC.
Different from other similar education platforms, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Answers quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. Our 350-401 Latest Test Dumps.Zip free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our 350-401 Latest Test Dumps.Zip real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 350-401 Latest Test Dumps.Zip exam pdf.
We will send our 350-401 Answers exam guide within 10 minutes after your payment. You can check your mailbox ten minutes after payment to see if our 350-401 Answers exam guide are in. What we attach importance to in the transaction of latest 350-401 Answers quiz prep is for your consideration about high quality and efficient products and time-saving service.
Cisco 350-401 Answers - You’ve heard it right.
Having been handling in this line for more than ten years, we can assure you that our 350-401 Answers study questions are of best quality and reasonable prices for your information. We offer free demos of the latest version covering all details of our 350-401 Answers exam braindumps available at present as representatives. So 350-401 Answers practice materials come within the scope of our business activities. Choose our 350-401 Answers learning guide, you won't regret!
Besides, the pollster conducted surveys of public opinions of our 350-401 Answers study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our 350-401 Answers actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CompTIA 220-1101 study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. The latest Oracle 1z0-808 quiz torrent can directly lead you to the success of your career. Our considerate service is not only reflected in the purchase process, but also reflected in the considerate after-sales assistance on our SAP C-S4CPR-2402 exam questions. The PDF version of our SAP C_S4CPR_2402 test braindumps provide demo for customers; you will have the right to download the demo for free if you choose to use the PDF version. Nutanix NCP-CI-Azure - Professional ability is very important both for the students and for the in-service staff because it proves their practical ability in the area they major in.
Updated: May 28, 2022