With the simulation test, all of our customers will get accustomed to the 200-301 Updates exam easily, and get rid of bad habits, which may influence your performance in the real 200-301 Updates exam. In addition, the mode of 200-301 Updates learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 200-301 Updates test questions would be absorbed, which is time-saving and high-efficient. As we all know, to make something right, the most important thing is that you have to find the right tool. Our 200-301 Updates study quiz is the exact study tool to help you pass the 200-301 Updates exam by your first attempt. Once our customers pay successfully, we will check about your email address and other information to avoid any error, and send you the 200-301 Updates prep guide in 5-10 minutes, so you can get our 200-301 Updates exam questions at first time.
All the help provided by 200-301 Updates test prep is free.
If you use our 200-301 - Cisco Certified Network Associate Exam Updates exam prep, you will have the opportunity to enjoy our updating system. Please follow your heart. In a knowledge-based job market, learning is your quickest pathway, your best investment.
Our PDF version of 200-301 Updates training materials is legible to read and remember, and support printing request. Software version of 200-301 Updates practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only.
Cisco 200-301 Updates - In other words, we will be your best helper.
With our 200-301 Updates study materials, only should you take about 20 - 30 hours to preparation can you attend the exam. The rest of the time you can do anything you want to do to, which can fully reduce your review pressure. Saving time and improving efficiency is the consistent purpose of our 200-301 Updates learning materials. With the help of our 200-301 Updates exam questions, your review process will no longer be full of pressure and anxiety.
We will provide you with professional advice before you buy our 200-301 Updates guide materials. If you have problems in the process of using our 200-301 Updates study questions, as long as you contact us anytime and anywhere, we will provide you with remote assistance until that all the problems on our 200-301 Updates exam braindumps are solved.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 5
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
Perhaps at this moment, you need the help of our Palo Alto Networks PCNSA study materials. If you find that you need to pay extra money for the Salesforce Platform-App-Builder study materials, please check whether you choose extra products or there is intellectual property tax. EC-COUNCIL 312-38 - But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely. Now, we have launched some popular Cisco 300-445 training prep to meet your demands. All applicants who are working on the ASQ CSQE exam are expected to achieve their goals, but there are many ways to prepare for exam.
Updated: May 28, 2022