We Promise we will very happy to answer your question on our 200-301 Quiz exam braindumps with more patience and enthusiasm and try our utmost to help you out of some troubles. So don’t hesitate to buy our {Examcode} study materials, we will give you the high-quality product and professional customer services. As long as you study with our200-301 Quiz learning guide, you will be sure to get your dreaming certification. The key point is that you are serious on our 200-301 Quiz exam questions and not just kidding. Our 200-301 Quiz practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. The passing rate of our study material is up to 99%.
Because it can help you prepare for the 200-301 Quiz exam.
We boost professional expert team to organize and compile the 200-301 - Cisco Certified Network Associate Exam Quiz training guide diligently and provide the great service. So it is of great importance for a lot of people who want to pass the exam and get the related certification to stick to studying and keep an optimistic mind. According to the survey from our company, the experts and professors from our company have designed and compiled the best New 200-301 Exam Questions cram guide in the global market.
If you purchase our 200-301 Quiz preparation questions, it will be very easy for you to easily and efficiently find the exam focus. More importantly, if you take our products into consideration, our 200-301 Quiz study materials will bring a good academic outcome for you. At the same time, we believe that our 200-301 Quiz training quiz will be very useful for you to have high quality learning time during your learning process.
Cisco 200-301 Quiz - Our research materials have many advantages.
Through all these years' experience, our 200-301 Quiz training materials are becoming more and more prefect. Moreover, we hold considerate after-sales services and sense-and-respond tenet all these years. So if you get any questions of our 200-301 Quiz learning guide, please get us informed. It means we will deal with your doubts with our 200-301 Quiz practice materials 24/7 with efficiency and patience.
You really can't find a more cost-effective product than 200-301 Quiz learning quiz! Our company wants more people to be able to use our products.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
CheckPoint 156-215.81.20 - All exams from different suppliers will be easy to handle. Huawei H13-527_V5.0 - Firstly, PDF version is easy to read and print. In the matter of quality, our Linux Foundation FOCP practice engine is unsustainable with reasonable prices. SAP C-THR70-2404 training materials will definitely live up to your expectations. Microsoft MB-210 - Because all of them have realized that it is indispensable to our daily life and work.
Updated: May 28, 2022